Tag: M.W=200-250

HPLC of Formula: C10H11NO4. Recently I am researching about METAL-ORGANIC FRAMEWORK; SELECTIVE DETECTION; FLUORESCENT-PROBE; DICARBOXYLATE LIGANDS; FAST-RESPONSE; FE(III) IONS; CR(VI) IONS; MOF; SENSOR; ACID, Saw an article supported by the National Natural Science Foundation of ChinaNational Natural Science Foundation of China (NSFC) [21571092, 21771095]; Natural Science Foundation of Shandong ProvinceNatural Science Foundation of Shandong Province [ZR2012BQ023, ZR2017JL013]; Youth Innovation Team of Shandong Colleges and Universities [2019KJC027]. Published in AMER CHEMICAL SOC in WASHINGTON ,Authors: Yu, YE; Wang, YH; Yan, H; Lu, J; Liu, HT; Li, YW; Wang, SN; Li, DC; Dou, JM; Yang, L; Zhou, Z. The CAS is 99-27-4. Through research, I have a further understanding and discovery of Dimethyl 5-aminoisophthalate

By using the reduced Schiff base tricarboxylate ligand H(3)cip, one novel 3D Cd-based coordination polymer (Cd-CP) with the formula [Cd(Hcip)(bpea)(0.5)(H2O)](n) (H(3)cip = 5-(3-carboxybenzylamino)isophthalic acid, bpea = 1,2-bis(4-pyridyl)ethane) has been solvothermally synthesized. The prepared Cd-CP possesses a 4-connected CdSO4 net based on dinuclear {Cd-2} units. Luminescence measurements revealed that the complex exhibited ratiometric turn-on luminescence responses toward Al3+ and Cr3+ with a significant color change, which could be easily distinguished by the naked eye under ultraviolet light. Cd-CP can also respond to Fe3+ through a turn-off mechanism. Interestingly, the luminescence quenched by Fe3+@Cd-CP can be recovered and increased significantly by adding some competitive Al3+, while Cr3+ can only marginally increase the luminescence intensity of Fe3+@Cd-CP. Moreover, the detection of the three aforementioned metal ions can be realized by using Cd-CP-coated test papers, extending the potential application regions of the reported material to point-of-care tests and environmental field studies.

HPLC of Formula: C10H11NO4. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Yu, YE; Wang, YH; Yan, H; Lu, J; Liu, HT; Li, YW; Wang, SN; Li, DC; Dou, JM; Yang, L; Zhou, Z or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In 2019 J MATER CHEM A published article about RETICULAR CHEMISTRY; KINETIC SEPARATION; EFFICIENT REMOVAL; PROPYNE; HYDROGENATION; SELECTIVITY; CAPACITY; STRATEGY; CATALYST; PROPANE in [Wu, Xue-Qian; Xie, Yabo; He, Tao; Zhang, Yong-Zheng; Kong, Xiang-Jing; Li, Jian-Rong] Beijing Univ Technol, Beijing Key Lab Green Catalysis & Separat, Dept Chem & Chem Engn, Coll Environm & Energy Engn, Beijing 100124, Peoples R China; [Liu, Jing-Hao; Yu, Jiamei] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing 100124, Peoples R China in 2019, Cited 44. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4. COA of Formula: C10H11NO4

By integrating open metal sites, Lewis basic sites, and tortuous diffusion paths, a new metal-organic framework has been designed and synthesized, which exhibits high adsorption capacity and excellent selectivity for separating a C3H4/C3H6 mixture. Meanwhile, the molecular packing state, dynamic diffusion coefficient of gases within the framework, and binding interaction are studied by molecular simulations.

COA of Formula: C10H11NO4. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Wu, XQ; Xie, YB; Liu, JH; He, T; Zhang, YZ; Yu, JM; Kong, XJ; Li, JR or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Recently I am researching about N-ISOCYANATES; CYCLOADDITION REACTIONS; CARBOXYLIC-ACIDS; BOND FORMATION; AMIDATION; ISOTHIOCYANATES; HYDROAMINATION; 1,4-ADDITION; ALLYLATION; ACTIVATION, Saw an article supported by the University of Ottawa; NSERCNatural Sciences and Engineering Research Council of Canada (NSERC). Published in AMER CHEMICAL SOC in WASHINGTON ,Authors: Derasp, JS; Beauchemin, AM. The CAS is 99-27-4. Through research, I have a further understanding and discovery of Dimethyl 5-aminoisophthalate. Quality Control of Dimethyl 5-aminoisophthalate

Isocyanates are useful building blocks for the synthesis of amides, although their widespread use has been limited by their high reactivity, which often results in poor functional group tolerance and a propensity to oligomerize. Herein, a rhodium-catalyzed synthesis of amides is described coupling boroxines with blocked (masked) isocyanates. The success of the reaction hinges on the ability to form both the isocyanate and the organorhodium intermediates in situ. Relying on masked isocyanate precursors and on the high reactivity of the organorhodium intermediate results in broad functional group tolerance, including protic nucleophilic groups such as amines, anilines, and alcohols.

About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Derasp, JS; Beauchemin, AM or concate me.. Quality Control of Dimethyl 5-aminoisophthalate

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Recently I am researching about RETICULAR CHEMISTRY; KINETIC SEPARATION; EFFICIENT REMOVAL; PROPYNE; HYDROGENATION; SELECTIVITY; CAPACITY; STRATEGY; CATALYST; PROPANE, Saw an article supported by the National Natural Science Foundation of ChinaNational Natural Science Foundation of China (NSFC) [21771012, 51621003]. Published in ROYAL SOC CHEMISTRY in CAMBRIDGE ,Authors: Wu, XQ; Xie, YB; Liu, JH; He, T; Zhang, YZ; Yu, JM; Kong, XJ; Li, JR. The CAS is 99-27-4. Through research, I have a further understanding and discovery of Dimethyl 5-aminoisophthalate. Product Details of 99-27-4

By integrating open metal sites, Lewis basic sites, and tortuous diffusion paths, a new metal-organic framework has been designed and synthesized, which exhibits high adsorption capacity and excellent selectivity for separating a C3H4/C3H6 mixture. Meanwhile, the molecular packing state, dynamic diffusion coefficient of gases within the framework, and binding interaction are studied by molecular simulations.

Product Details of 99-27-4. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Wu, XQ; Xie, YB; Liu, JH; He, T; Zhang, YZ; Yu, JM; Kong, XJ; Li, JR or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

I found the field of Chemistry; Food Science & Technology very interesting. Saw the article Changes in structure and flavor of egg yolk gel induced by lipid migration under heating published in 2020. Safety of Dimethyl 5-aminoisophthalate, Reprint Addresses Jin, YG (corresponding author), Huazhong Agr Univ, Coll Food Sci & Technol, Natl Res & Dev Ctr Egg Proc, Wuhan, Hubei, Peoples R China.. The CAS is 99-27-4. Through research, I have a further understanding and discovery of Dimethyl 5-aminoisophthalate

Lipid migration is widespread in food system and has an important effect on food quality. It is urgent to explore the lipid migration in egg yolk after heating. The content of lipids in upper part (HL) was higher than that in bottom part (LL), and the lipids migration in yolk gel under heating were confirmed by MRI (T1) and T2 relaxation time of LF-NMR. Subsequently, the XDR result demonstrated the high lipid content induced the decrease in crystallinity of protein in HL part. The structures of HL part trend to be more ordered, stable (beta-sheet & beta-turns) and flat (alpha-helices) than LL part, also, more water distributed in LL part were observed by FTIR spectrum. The SEM results revealed that lipids migrated from LL to HL part, eventually lead to the protein in HL part of heated yolk gel unfold, the globular structure collapsed and become flatter. Morever, ethyl acetate, hexanal, etc. and hexanal, ethyl acetate, dimethyl-silanediol, etc. were identified as the main VOCs of LL and HL part of heated yolk gel, respectively. Lipid migration result in more lipid-specific volatiles were formed in the HL part, such as hexanal, 3-hydroxy-cyclohexanone, 2-pentyl-furan, D-limonene, 2-ethyl-1-hexanol, benzeneacetaldehyde. Lipid migration in heated yolk gel, caused by heat treatment, resulted in the changes of structure and flavor between HL and LL part.

Safety of Dimethyl 5-aminoisophthalate. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Xiang, XL; Liu, YY; Liu, Y; Wang, XY; Jin, YG or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Karmakar, A; Paul, A; Rubio, GMDM; Soliman, MMA; Fatima, M; da Silva, CG; Pombeiro, AJL in [Karmakar, Anirban; Paul, Anup; Rubio, Guilherme M. D. M.; Soliman, Mohamed M. A.; Fatima, M.; Guedes da Silva, C.; Pombeiro, Armando J. L.] Univ Lisbon, Inst Super Tecn, Ctr Quim Estrutural, Lisbon, Portugal published Highly Efficient Bifunctional Amide Functionalized Zn and Cd Metal Organic Frameworks for One-Pot Cascade Deacetalization-Knoevenagel Reactions in 2019, Cited 31. Product Details of 99-27-4. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4.

A pyridine-based amide functionalized tetracarboxylic acid, 5,5 ‘-(pyridine-2, 6-dicarbonyl)bis(azanediyl)}diisophthalic acid (H4L), was synthesized and its coordination chemistry toward zinc(II) and cadmium(II) ions was studied. The reactions of H4L with Zn(NO3)(2).6H(2)O and Cd(NO3)(2).4H(2)O led to its full or partial deprotonation, respectively, and the formation of the 2D coordination polymers [Zn-2(L)(H2O)(4)](n).4n(H2O) (1) and [Cd-3(HL)(2)(DMF)(4)](n).4n(DMF) (2) (DMF = N,N’-dimethylformamide), respectively. They were characterized by elemental analysis, FT-IR, photoluminescence, thermogravimetry, and single-crystal and powder X-ray diffraction. In 1, the L4- ligand is planar with every carboxylate anion binding a Zn(II) cation and giving rise to a 2D grid with the metals with tetrahedral environments. In 2, the combination of bridging HL3- and dimethylformamide to form trinuclear Cd(II) clusters engenders secondary building block units and generates a layer-type 2D network with the metals with octahedral and pentagonal bipyramid coordination geometries. The topological analyses of 1 and 2 reveal 2,4-connected and 3,6-connected binodal nets, respectively. On account of the presence of Lewis acid (Zn or Cd centers) as well as basic (uncoordinated pyridine and amide groups) sites, 1 and (to a much lower extent) 2 effectively catalyze the one-pot cascade deacetalization-Knoevenagel condensation reactions under quite mild conditions. They act as heterogeneous catalysts, being easy to recover and recycle without losing activity.

About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Karmakar, A; Paul, A; Rubio, GMDM; Soliman, MMA; Fatima, M; da Silva, CG; Pombeiro, AJL or concate me.. Product Details of 99-27-4

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

An article Rhodium-Catalyzed Synthesis of Amides from Functionalized Blocked Isocyanates WOS:000485090400043 published article about N-ISOCYANATES; CYCLOADDITION REACTIONS; CARBOXYLIC-ACIDS; BOND FORMATION; AMIDATION; ISOTHIOCYANATES; HYDROAMINATION; 1,4-ADDITION; ALLYLATION; ACTIVATION in [Derasp, Joshua S.; Beauchemin, Andre M.] Univ Ottawa, Dept Chem & Biomol Sci, Ctr Catalysis Res & Innovat, Ottawa, ON K1N 6N5, Canada in 2019, Cited 80. HPLC of Formula: C10H11NO4. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4

Isocyanates are useful building blocks for the synthesis of amides, although their widespread use has been limited by their high reactivity, which often results in poor functional group tolerance and a propensity to oligomerize. Herein, a rhodium-catalyzed synthesis of amides is described coupling boroxines with blocked (masked) isocyanates. The success of the reaction hinges on the ability to form both the isocyanate and the organorhodium intermediates in situ. Relying on masked isocyanate precursors and on the high reactivity of the organorhodium intermediate results in broad functional group tolerance, including protic nucleophilic groups such as amines, anilines, and alcohols.

About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Derasp, JS; Beauchemin, AM or concate me.. HPLC of Formula: C10H11NO4

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Name: Dimethyl 5-aminoisophthalate. Authors Liu, BW; Zhao, HB; Chen, L; Chen, L; Wang, XL; Wang, YZ in ELSEVIER SCI LTD published article about in [Liu, Bo-Wen; Zhao, Hai-Bo; Chen, Lin; Chen, Li; Wang, Xiu-Li; Wang, Yu-Zhong] Sichuan Univ, Collaborat Innovat Ctr Ecofriendly & Fire Safety, Natl Engn Lab Ecofriendly Polymer Mat Sichuan, Sch Chem Engn,State Key Lab Polymer Mat Engn,MOE, Chengdu 610064, Peoples R China in 2021, Cited 60. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4

Conventional methods to improve the flame retardancy of polymeric materials usually involve the use of flame-retardant elements such as Cl, Br and P, however, their use may bring more smoke and toxic gases hazards, and more importantly, cause non-negligible environmental and ecological problems. In this work, we put forward a novel green strategy that eliminates the use of any conventional flame-retardant elements to improve the flame retardancy by incorporating a synergistically cross-linkable structure (named PN) containing phenylacetylene and phenylimide groups. The resulting PN copolymer exhibited an excellent 55% lower smoke release rate and 68% lower heat release rate than the pure polymer, as well as a high LOI value of 32% and UL-94 V-0 rating with excellent anti-dripping performance. TG-DSC, rheological and FTIR results proved the high cross-linking ability of the PN copolymer due to the synergistic cross-linking effect between the imide-isoimide rearrangement of phenylimide and the self-cross-linking of phenylacetylene. The SEM, Raman and Py-GC/MS results further upheld the condensed phase flame-retardant mechanism. This eco-friendly synergistic cross-linking strategy provided new perspective for the design and synthesis of polymeric materials with excellent flame retardancy, great anti-dripping performance, and low release of heat, smoke, and toxic gas.

Name: Dimethyl 5-aminoisophthalate. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Liu, BW; Zhao, HB; Chen, L; Chen, L; Wang, XL; Wang, YZ or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

I found the field of Chemistry; Energy & Fuels; Materials Science very interesting. Saw the article 3D printable robust shape memory PET copolyesters with fire safety via pi-stacking and synergistic crosslinking published in 2019. Recommanded Product: Dimethyl 5-aminoisophthalate, Reprint Addresses Wang, XL; Wang, YZ (corresponding author), Sichuan Univ, Natl Engn Lab Ecofriendly Polymer Mat Sichuan, Collaborat Innovat Ctr Ecofriendly & Fire Safety, State Key Lab Polymer Mat Engn,Coll Light Ind Tex, Chengdu 610064, Sichuan, Peoples R China.. The CAS is 99-27-4. Through research, I have a further understanding and discovery of Dimethyl 5-aminoisophthalate

The practical problems of insufficient mechanical strength, poor processability, tedious synthesis and flammability facing shape memory polymers have limited their further usage in industrial fields, especially in construction and aerospace. A novel and very simple method of ternary polymerization is presented here to prepare multi-functional copolyesters from general poly(ethylene terephthalate) (PET) through the new well-designed third monomer that features pendent phenylacetylene-phenylimide units. The pi-pi stacking between phenylacetylene groups as a reversible net-point not only endows the copolyesters with good shape memory and self-healability, but also reinforces the interchain interaction, leading to high tensile strength (79.6-89.6 MPa). Interestingly enough, the phenylacetylene can synergistically crosslink with the unsaturated C N group generated from the phenylimide during burning, resulting in excellent flame retardancy. Thermoplastic smart copolyesters can be designed into fire alarms and can also be used for 3D printing. The printed geometries exhibit good shape memory behaviors, which could be deformed into a small size to save space during transportation/storage and allow manufacturing freedom for space applications.

Recommanded Product: Dimethyl 5-aminoisophthalate. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Chen, L; Zhao, HB; Ni, YP; Fu, T; Wu, WS; Wang, XL; Wang, YZ or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Authors Hu, H; Zhu, JX; Yang, FL; Chen, ZX; Deng, ML; Weng, LH; Ling, Y; Zhou, YM in ROYAL SOC CHEMISTRY published article about COMPOSITE MEMBRANES; SEPARATION; DESIGN; MOF; SOLVENT; CHALLENGES; CHEMISTRY; PLATFORM; ETHANOL; WATER in [Hu, Han; Zhu, Jiaxing; Yang, Feilong; Chen, Zhenxia; Deng, Mingli; Weng, Linhong; Ling, Yun; Zhou, Yaming] Fudan Univ, Shanghai Key Lab Mol Catalysis & Innovat Mat, Dept Chem, Shanghai 200438, Peoples R China in 2019, Cited 39. Product Details of 99-27-4. The Name is Dimethyl 5-aminoisophthalate. Through research, I have a further understanding and discovery of 99-27-4

We report a robust and rigid etb-type metal-organic framework, in which its pore surface is decorated with flexible ethoxyl groups. It shows unprecedentedly selective adsorption of acetone (E-N(T) value of 0.355, kinetic diameter of 4.6 angstrom) over methanol (E-N(T) value of 0.762, kinetic diameter of 3.6 angstrom) for their azeotropic mixture.

Product Details of 99-27-4. About Dimethyl 5-aminoisophthalate, If you have any questions, you can contact Hu, H; Zhu, JX; Yang, FL; Chen, ZX; Deng, ML; Weng, LH; Ling, Y; Zhou, YM or concate me.

Reference:
Patent; ASTRA ZENECA AB; NPS PHARMACEUTICALS, INC.; WO2004/14881; (2004); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics