Tag: M.W=100-200

Synthetic Route of 15963-40-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15963-40-3, name is Methyl 3-methylenecyclobutanecarboxylate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A dry three-neck flask was charged with methyl 3-methylenecyclobutanecarboxylate (6 g, 47.6 mmol) and dry THF (20 ml) and cooled to -10 C. BH3.THF (12.26 g, 143 mmol) was then added via a syringe dropwise. The resulting mixture was stirred for 4h at rt and was cooled to -20 C – 10C. Methanol was then added and the mixture was stirred for 15min. Sodium hydroxide (3M; 30 ml) and H2O2 (7.29 ml_, 238 mmol) were added in sequence. The mixture was stirred for 2h and a saturated sodium sulfite solution (100 ml) was added. The reaction mixture was diluted with water, then extracted with ethyl acetate, washed with water and brine, dried over sodium sulfate, filtered, and the residue was purified by flash chromatography eluting with (petroleum ether/EtOAc = 3/1 ) to afford methyl 3- (hydroxymethyl)cyclobutanecarboxylate (250 mg, 1 .387 mmol, 2.92 % yield) as a yellow oil.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 3-methylenecyclobutanecarboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; GLAXOSMITHKLINE (CHINA) R&D COMPANY LIMITED; BARBE, Guillaume; BOHNERT, Gary; CALANDRA, Nicholas; LAMBERT III, Millard Hurst; LU, Hongfu; LOBERA, Mercedes; RAMANJULU, Joshi; REN, Feng; YANG, Ting; (337 pag.)WO2019/63748; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

383-62-0, name is Ethyl 2-chloro-2,2-difluoroacetate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C4H5ClF2O2

tert-Butyl 5-bromo-3-{(1S)-1-[2-chloro-6-(difluoromethoxy)-3-fluorophenyl]ethyl}-1H-pyrrolo[2,3-b]pyridine-1-carboxylate A mixture of tert-butyl 5-bromo-3-[(1S)-1-(2-chloro-3-fluoro-6-hydroxyphenyl)ethyl]-1H-pyrrolo[2,3-b]pyridine-1-carboxylate (1.00 g, 2.13 mmol), chlorodifluoroacetic acid ethyl ester (2.700 mL, 21.29 mmol), K2CO3 (882.7 mg, 6.387 mmol) and DMF (40 mL, 500 mmol) was heated to 70 C. for 6 h in a sealed tube. The material was extracted with EtOAc, and washed with water (3*). The organic layer was purified via column chromatography, eluting with 3-10% EtOAc/hexanes. The fractions containing the pure product were concentrated in vacuo to afford the title compound as a light yellow solid. 1H NMR (400 MHz, CD3OD): delta=1.67-1.69 (m, 9H), 1.80 (d, J=7.1 Hz, 3H), 4.94-5.03 (m, 1H), 6.63 (s, 1H), 7.15 (dd, J=9.1, 4.5 Hz, 1H), 7.22-7.28 (m, 1H), 7.55 (d, J=2.0 Hz, 1H), 7.70 (d, J=1.5 Hz, 1H), 8.34 (d, J=2.0 Hz, 1H). MS (ES+): m/z=519.03/521.03 (75/100) [MH+]. HPLC: tR=1.93 min (polar-3 min, HPLC-ACQUITY).

The synthetic route of 383-62-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; OSI Pharmaceuticals, LLC; US2011/281888; (2011); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 426-65-3, name is Ethyl Pentafluoropropionate, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of Ethyl Pentafluoropropionate

Pentafluoroethyl cyclopropylethynyl ketone, (XVI) can be synthesized in an analogous fashion using ethyl pentafluoropropionate in the above reaction.

According to the analysis of related databases, 426-65-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Pierce, Michael Ernest; Radesca, Lilian Alicia; US6348616; (2002); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

7270-63-5, name is 5-Diazo-2,2-dimethyl-1,3-dioxane-4,6-dione, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C6H6N2O4

General procedure: To a solution of diazo compound 1 (0.5 mmol) and alkynes (1.1 mmol) in toluene (2 mL) was added rhodium(II) pivalate (0.01 mmol). The reaction mixture was stirred at 60C for 0.5-5 h. The solvent was evaporated in rotary evaporator under reduced pressure to give the residue. The residue was purified by flash column chromatography on silica gel to give the product. 4.2.13. 2,4-Bis(4-(trifluoromethyl)phenyl)-6H-furo[2,3-b]pyran-6-one (5l). Reaction of 1 (85 mg, 0.5 mmol) and 4-ethynyl-alpha,alpha,alpha-trifluorotoluene (187 mg, 1.1 mmol) under Rh2(OPiv)4 (6 mg, 0.01 mmol) afforded 5l (106 mg, 50%) as a solid: mp 158-160 C; 1H NMR (300 MHz, CDCl3) delta 7.82 (2H, d, J=8.1 Hz), 7.76-7.73 (4H, m), 7.65 (2H, d, J=8.1 Hz), 6.94 (1H, s), 6.26 (1H, s); 13C NMR (75 MHz, CDCl3) delta 158.6, 152.1, 147.3, 138.4, 131.9, 128.2, 127.9, 126.4, 126.3, 126.3, 126.1, 126.0, 125.1, 123.7, 106.4, 102.4, 99.5; IR (KBr) 3125, 1728, 1616, 1528, 1325, 1127, 837, 672 cm-1; HRMS m/z (M+) calcd for C21H10F6O3: 424.0534. Found: 424.0532.

The synthetic route of 7270-63-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Somai Magar, Krishna Bahadur; Lee, Yong Rok; Kim, Sung Hong; Tetrahedron; vol. 69; 44; (2013); p. 9294 – 9302;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

34846-90-7, name is Methyl 3-methoxyacrylate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. COA of Formula: C5H8O3

To a solution of 1,1,2,2-tetrafluoroethyldimethylamine (96percent, 46 g, 305 mmol) in acetonitrile (100 ml) was added dropwise, at 25° C. under Argon, BF3-etherate (38.9 g, 274 mmol). Subsequently, under reflux conditions (approx. 70° C.), a solution of methyl 3-methoxyacrylate (95percent, 33.5 g, 274 mmol) in acetonitrile (75 ml) was added dropwise to the reaction mixture within 1 h. After stirring under reflux conditions for 21 h, the reaction mixture was cooled to 25° C. The resulting reaction mixture was added dropwise to a solution of methylhydrazine (21 g, 457 mmol) in acetonitrile (48 ml) at 0 to 15° C. within 1.5 h. After stirring at 25° C. for 0.5 h, water (100 ml) was added. The reaction mixture was extracted once with 150 ml and once with 90 ml of methylene chloride. The combined organic phases were washed with water (1.x.200 ml). The resulting organic phase (530 g) contained, according to GC area percent analysis, methyl 3-difluoromethyl-1-methylpyrazole-4-carboxylate and methyl 5-difluoromethyl-1-methylpyrazole-4-carboxylate in a ratio of 6.8:1. According to quantitative HPLC analysis, the organic phase comprised 6.7percent by weight of methyl 3-difluoromethyl-1-methylpyrazole-4-carboxylate. This corresponds to a yield of 68percent (based on methyl 3-methoxyacrylate).

The synthetic route of 34846-90-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BASF SE; US2010/184994; (2010); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 90030-48-1, name is Sodium 3-methoxy-3-oxopropane-1-sulfinate, A new synthetic method of this compound is introduced below., 90030-48-1

Cu(I)I (570 mg, 3.02 mmol) was added to a solution of 4-((8-(6-bromo-4- methylbenzo[d]thiazol-2-yl)-8-azabicyclo[3.2.l]octan-3-yloxy)methyl)-5-cyclopropyl-3-(2- (trifluoromethoxy)phenyl)isoxazole_(960 mg, 1.51 mmol), sodium 3-methoxy-3-oxopropane- 1-sulfinate (790 mg, 4.54 mmol ) and L-proline (174 mg, 1.51 mmol) in dimethylsulfoxide (20 ml) at room temperature and the resulting mixture warmed to 130 C. After 16 h, water and ethyl acetate were added and the mixture filtered through celite. The filtrate was then washed with cold water, brine, dried over anhydrous Na2S04, filtered, concentrated under reduced pressure and purified by flash column chromatography using silica gel 100-200 mesh, eluting with 0-65% ethyl acetate in petroleum ether to afford the titled compound (0.25 g, 25 %) as a solid. LC-MS: 2.57 mins, [M+H]+ 706

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; INORBIT THERAPEUTICS AB; SHARMA, Rajiv; BENTHEM, Lambertus; JUDKINS, Robert; (69 pag.)WO2020/33382; (2020); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 35179-98-7, name is Chloromethyl ethyl carbonate, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C4H7ClO3

EXAMPLE 2 Preparation of 4-fluoro-2-[[(4-methoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole-1-ylmethyl ethyl carbonate To NaOH (0.26 g, 6.5 mmol) dissolved in H2 O (12 ml) 4-fluoro-2-[[(4-methoxy-2-pyridinyl) methyl]sulfinyl]-1H-benzimidazole (1.0 g, 3.3 mmol) and tetrabutylammoniumhydrogen sulfate (1.1 g, 3.2 mmol) were added under stirring. The mixture was stirred for about 5 min, at ambient temperature and then extracted 3 times with CH2 Cl2 (20 ml). After separation the combined CH2 Cl2 phases were dried over Na2 SO4, filtrated and the solvent evaporated off giving an oil. The residual oil was dissolved in toluene (30 ml). Chloromethyl ethyl carbonate (0.68 g, crude material) dissolved in dry toluene (3 ml) was added under a protective gas and under stirring. The mixture was stirred at ambient temperature over night. The toluene was evaporated off and the residual oil was chromatographed on a silica column using ethyl acetate as eluent. Crystallizing from ethyl acetate – diethyl ether gave the title compound (0.33 g, 25%). NMR data for the product is given below.

According to the analysis of related databases, 35179-98-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Aktiebolaget Hassle; US5049674; (1991); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 6933-47-7, name is Methyl 4-amino-2-methylbenzoate, molecular formula is C9H11NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 6933-47-7

General procedure: A solution of (7: R1=cyclopentyloxy) (100mg, 363mumol) in dichloromethane (5 mL), cooled to 0C, was treated with oxalyl chloride (63.6 muL, 727 mumol), followed by a drop of N,N-dimethylformamide. The resultant mixture was stirred for 1h at room temperature. The solvent was evaporated in vacuo and the residue dissolved in dichloromethane (5 mL) and then treated with a solution of methyl 4-aminobenzoate (8: R2=H, R=Me) (54.9mg, 363mumol) and di-isopropylethylamine (190muL, 1.09mmol) in dichloromethane (5mL). The reaction mixture was stirred for 12 h at room temperature and then partitioned between dichloromethane (20 mL) and aqueous 1M hydrochloric acid (20 mL). The phases were separated, and the organic phase was washed successively with water (2×20 mL), and brine (20 mL), dried over magnesium sulfate, filtered and then the solvent was removed in vacuo. The residue was purified by silica gel chromatography (12 g, 0-100 % ethyl acetate/isohexane) to afford methyl 4-[3,5-dichloro-4-(cyclopentyloxy)benzamido]benzoate (10: R1 = cyclopentyloxy, R2 = H, R =Me) (30mg, 20% yield). 1H NMR (400MHz, CDCl3) delta 8.06 (2H, d, J=8.8Hz,), 7.85 (1H, br s), 7.82 (2H, s), 7.71 (2H, d, J=8.8Hz), 5.07-5.03 (1H, m), 3.92 (3H, s), 2.10-1.90 (4H, m), 1.85-1.70 (2H, m), 1.70-1.60 (2H, m).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6933-47-7, its application will become more common.

Reference:
Article; Clarke, Earl; Jarvis, Christopher I.; Goncalves, Maria B.; Kalindjian, S. Barret; Adams, David R.; Brown, Jane T.; Shiers, Jason J.; Taddei, David M.A.; Ravier, Elodie; Barlow, Stephanie; Miller, Iain; Smith, Vanessa; Borthwick, Alan D.; Corcoran, Jonathan P.T.; Bioorganic and Medicinal Chemistry; vol. 26; 4; (2018); p. 798 – 814;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 3196-15-4, The chemical industry reduces the impact on the environment during synthesis 3196-15-4, name is Methyl 2-bromobutyrate, I believe this compound will play a more active role in future production and life.

5-Ethyl-2-pyrazin-2-yl-thiazol-4-ol: A solution of pyrazine-2-carbothioamide (1 g, 7.19 mmol) in ethanol (20 ml) was treated with methyl 2-bromobutyrate (1.56 g, 992 mul, 8.62 mmol) an pyridine (853 mg, 872 mul, 10.8 mmol) and heated to reflux for 2 hours. The reaction mixture was cooled and concentrated to dryness under reduced pressure, and the resulting solid was filtered and washed with diethyl ether to provide 5-ethyl-2-pyrazin-2-yl-thiazol-4-ol (0.740 g, 50%) which was used directly without further purification. MS (M+H)=208.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-bromobutyrate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Hoffmann-La Roche Inc; Bhagirath, Niala; Brameld, Kenneth Albert; Kennedy-Smith, Joshua; US2013/90334; (2013); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

23676-08-6, name is Methyl 4-ethoxybenzoate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: esters-buliding-blocks

General procedure: To a suspension of sodium hydride (60% in mineral oil, 5 eq) in dryTHF was added solution of substituted methyl benzoate (2 eq) in dryTHF. After mixture refluxed, substituted acetophenone (1 eq) in dryTHF was added dropwise. The mixture was refluxed overnight, then quenched with 1 N HCl. The mixture was extracted with ethyl acetatetwice, and the combined organic phase was washed with brine solution,dried with anhydrous Na2SO4, filtrated, and concentrated under reduced pressure. The residue was purified on a silica gel column.

The synthetic route of 23676-08-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Jeong, Jieun; Kim, Kun-Hee; Kim, Dong-Young; Chandrasekaran, Gopalakrishnan; Kim, Minhee; Pagire, Suvarna H.; Dighe, Mahesh; Choi, Eun Young; Bak, Su-Min; Kim, Eun-Young; Shin, Myung-Geun; Choi, Seok-Yong; Ahn, Jin Hee; Bioorganic and Medicinal Chemistry; vol. 27; 19; (2019);,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics