Category: 541-16-2

541-16-2, name is Di-tert-Butyl malonate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C11H20O4

Di-tert-butyl malonate (33.5 mL, 150 mmol) was added dropwise to a stirred suspension of NaH (6.0 g, 60 % suspension in oil, 150 mmol) in 1,2-dimethoxyethane (100 mL) under Ar, cooled in a water-ice bath. After stirring for 10 min, Intermediate 1G (16.2 g, 50 mmol) was added and the reaction was heated at 85 C for 20 h. After this time, acetic acid (100 mL) was added, the reaction flask was fitted with a distillation head and the temperature was raised to 130 C. 1,2-dimethoxyethane was distilled off under atmospheric pressure until the distillate was acidic (-100 mL). The distillation head was removed, a reflux condenser was attached, water (20 mL) was added and the reaction heated at 130 C for 12 h. The reaction was concentrated under reduced pressure and poured onto 200 g of ice and 100 mL of saturated aqueous NaOAc. Intermediate 1H was isolated as a white solid by filtration and further dried by reflxing with toluene in a Dean- Stark apparatus (11.0 g, 76 %). m/z ( +H)+= 288.2.1H- MR (400 MHz; DMSO-d6): delta 12.05 (bs, 1H), 8.79 (d, J= 4.5 Hz, 1H), 8.06 (dd, J= 9.2, 5.8 Hz, 1H), 7.94 (dd, J= 11.0, 2.8 Hz, 1H), 7.66-7.61 (m, 1H), 7.50 (d, J= 4.6 Hz, 1H), 2.41 (d, J= 7.6 Hz, 2H), 2.28- 2.23 (m, 1H), 1.87-1.78 (m, 2H), 1.73-1.64 (m, 6H).

The synthetic route of 541-16-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; BALOG, James Aaron; CHERNEY, Emily Charlotte; SHAN, Weifang; WILLIAMS, David K.; ZHANG, Liping; (87 pag.)WO2019/74822; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 541-16-2, These common heterocyclic compound, 541-16-2, name is Di-tert-Butyl malonate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of di-tert-butyl malonate (4.3 g, 19.91 mmol, 1.99 equiv) and potassium carbonate (2.8 g, 20.29 mmol, 2.03 equiv) in N,N-dimethylformamide (30 mL) was stirred at 65C for 30 min. A solution of methyl 4-(4-(chloromethyl)-5-methyloxazol- 2-yl)benzoate (2.65 g, 10.00 mmol, 1.00 equiv) in N,N-dimethylformamide (5 mL) was then added dropwise with stirring to the reaction mixture. The resulting solution was stirred at 65C overnight and then quenched with 60 mL of ice and water. The mixture was extracted with 2×50 mL of ethyl acetate. The combined organic layers was washed with 3×30 mL of brine, dried over anhydrous sodium sulfate and concentrated under vacuum to give 4.0 g (90%) of methyl 4-(4-(3-tert-butoxy-2-(tert- butoxycarbonyl)-3-oxopropyl)-5-methyloxazol-2-yl)benzoate as a light yellow solid. LC-MS: (ES, m/z): 446 [M+H]+, 390, 334, 272, 230, 115.

The synthetic route of 541-16-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THE BOARD OF TRUSTEES OF THE LELAND STANFORD JUNIOR UNIVERSITY; AUCKLAND UNISERVICES LIMITED; RUGA CORPORATION; GIACCA, Amato; LAI, Edwin; RAZORENOVA, Olga; CHAN, Denise; HAY, Michael, Patrick; BONNET, Muriel; SUN, Connie; TABIBIAZAR, Ray; YUEN, Po-wai; WO2013/155338; (2013); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 541-16-2 as follows. Recommanded Product: 541-16-2

Compound 185a (3.15 g, 8.39 mmol) was dissolved in 50 mL of tetrahydrofuran,3.81 mL of tert-butoxycarboxylic anhydride (i.e., di-tert-butyl dicarbonate Boc2O, 16.78 mmol) and 100 mg of p-dimethylaminopyridine,Room temperature reaction 4h.The residue was purified by column chromatography, eluting with petroleum ether: ethyl acetate = 20: 1 (v / v) to give 3.18 g of compound 185b in 91% yield.

According to the analysis of related databases, 541-16-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Ocean University of China; Key Laboratory of Chemistry for Natural Products of Guizhou Province Chinese Academy of Sciences; Zhu, Weiming; Ma, Hongguang; Wang, Liping; Xu, Zhihong; Zhang, Yapeng; Wang, Yi; Liu, Peipei; (142 pag.)CN106083830; (2016); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 541-16-2, A common heterocyclic compound, 541-16-2, name is Di-tert-Butyl malonate, molecular formula is C11H20O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: Preparation of 2-ethylcyclopropane-1,1-dicarboxylic acid di-tert-butyl ester, shown below To a suspension of benzyltriethylammonium chloride (21.0 g, 92.2 mmol) in a 50% aqueous NaOH solution (92.4 g in 185 mL H2O) was added 1,2-dibromobutane (30.0 g, 138.9 mmol) and di-tert-butylmalonate (20.0 g, 92.5 mmol). The reaction mixture was vigorously stirred for 18 hours at room temperature and treated with a mixture of ice and water. The crude product was extracted with dichloromethane (3*) and sequentially washed with water (3*), and brine. The organic extracts were combined, dried (MgSO4), filtered, and concentrated in vacuo. The resulting residue was purified by flash column chromatography (100g SiO2, 3% diethyl ether in hexane) to provide the desired product (18.3 g, 67.8 mmol, 73% yield) which was used directly in the next reaction.

The synthetic route of 541-16-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bristol-Myers Squibb Company; US2009/304626; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 541-16-2, name is Di-tert-Butyl malonate, A new synthetic method of this compound is introduced below., Formula: C11H20O4

A solution of sodium hydride (0.040 g, 1.54 mmol) in THF (100mL) was cooled to 0C and treated with di-tert-butyl malonate (20.7 3 mL, 92.47 mmol) dropwise via dropping funnel, over 20 min. After stirring at room temperature for 30 min., 3,3-dimethylallyl bromide (9.7 mL, 83.22 mmol) was added. After stirring an additional 19 h, the reaction mixture was diluted with 10% HCl solution (100 mL) and EtOAc (100 mL). The resulting organic phase was washed with satd. aq. NaCl, dried over MgSO4, filtered, and concentrated to afford 25.74 g (94%)of a crude yellow oil. TLC: Rf 0.60 (silica, 10% ethyl acetate-hexane).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Bayer Corporation; EP923530; (2004); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 541-16-2, name is Di-tert-Butyl malonate, A new synthetic method of this compound is introduced below., Computed Properties of C11H20O4

7a. Preparation of (1R,2R)/(1S2S) 1-amino-2-ethylcyclopropanecarboxylic Acid tert-butyl Ester (Racemic Mixture); Step 1: Preparation of 2-ethylcyclopropane-1,1-dicarboxylic acid di-tert-butyl ester, Shown Below To a suspension of benzyltriethylammonium chloride (21.0 g, 92.2 mmol) in a 50% aqueous NaOH solution (92.4 g in 185 mL H2O) was added 1,2-dibromobutane (30.0 g, 138.9 mmol) and di-tert-butylmalonate (20.0 g, 92.5 mmol). The reaction mixture was vigorously stirred for 18 hours at room temperature and treated with a mixture of ice and water. The crude product was extracted with dichloromethane (3*) and sequentially washed with water (3*), and brine. The organic extracts were combined, dried (MgSO4), filtered, and concentrated in vacuo. The resulting residue was purified by flash column chromatography (100 g SiO2, 3% diethyl ether in hexane) to provide the desired product (18.3 g, 67.8 mmol, 73% yield) which was used directly in the next reaction.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Bristol-Myers Squibb Company; US2008/119461; (2008); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 541-16-2, name is Di-tert-Butyl malonate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 541-16-2, Safety of Di-tert-Butyl malonate

Step 1: Preparation of 2-ethylcyclopropane-1,1-dicarboxylic acid di-tert-butyl ester, shown below To a suspension of benzyltriethylammonium chloride (21.0 g, 92.2 mmol) in a 50% aqueous NaOH solution (92.4 g in 185 mL H2O) was added 1,2-dibromobutane (30.0 g, 138.9 mmol) and di-tert-butylmalonate (20.0 g, 92.5 mmol). The reaction mixture was vigorously stirred for 18 hours at room temperature and treated with a mixture of ice and water. The crude product was extracted with dichloromethane (3*) and sequentially washed with water (3*), and brine. The organic extracts were combined, dried (MgSO4), filtered, and concentrated in vacuo. The resulting residue was purified by flash column chromatography (100 g SiO2, 3% diethyl ether in hexane) to provide the desired product (18.3 g, 67.8 mmol, 73% yield) which was used directly in the next reaction.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Di-tert-Butyl malonate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Bristol-Myers Squibb Company; US2009/274648; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 541-16-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 541-16-2 as follows.

A mixture of di-tert-butyl malonate (4.3 g, 19.91 mmol, 1.99 equiv) and potassium carbonate (2.8 g, 20.29 mmol, 2.03 equiv) in N,N-dimethylformamide (30 mL) was stirred at 65 C. for 30 min A solution of methyl 4-(4-(chloromethyl)-5-methyloxazol-2-yl)benzoate (2.65 g, 10.00 mmol, 1.00 equiv) in N,N-dimethylformamide (5 mL) was then added dropwise with stiffing to the reaction mixture. The resulting solution was stirred at 65 C. overnight and then quenched with 60 mL of ice and water. The mixture was extracted with 2×50 mL of ethyl acetate. The combined organic layers was washed with 3×30 mL of brine, dried over anhydrous sodium sulfate and concentrated under vacuum to give 4.0 g (90%) of methyl 4-(4-(3-tert-butoxy-2-(tert-butoxycarbonyl)-3-oxopropyl)-5-methyloxazol-2-yl)benzoate as a light yellow solid. LC-MS: (ES, m/z): 446 [M+H]+, 390, 334, 272, 230, 115.

According to the analysis of related databases, 541-16-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; The Board of Trustees of the Leland Stanford Junior University; Auckland UniServices Limited; Ruga Corporation; Giaccia, Amato; Lai, Edwin; Razorenova, Olga; Chan, Denise; Hay, Michael Patrick; Bonnet, Muriel; Sun, Connie; Tabibiazar, Ray; Yuen, Po-wai; US2015/329503; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

541-16-2, name is Di-tert-Butyl malonate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 541-16-2

Di-tert-butyl malonate (33.5 mL, 150 mmol) was added dropwise to a stirred suspension of NaH (6.0 g, 60 % suspension in oil, 150 mmol) in 1,2-dimethoxyethane (100 mL) under Ar, cooled in a water-ice bath. After stirring for 10 min, Intermediate 1G (16.2 g, 50 mmol) was added and the reaction was heated at 85 C for 20 h. After this time, acetic acid (100 mL) was added, the reaction flask was fitted with a distillation head and the temperature was raised to 130 C. 1,2-dimethoxyethane was distilled off under atmospheric pressure until the distillate was acidic (-100 mL). The distillation head was removed, a reflux condenser was attached, water (20 mL) was added and the reaction heated at 130 C for 12 h. The reaction was concentrated under reduced pressure and poured onto 200 g of ice and 100 mL of saturated aqueous NaOAc. Intermediate 1H was isolated as a white solid by filtration and further dried by reflxing with toluene in a Dean- Stark apparatus (11.0 g, 76 %). m/z ( +H)+= 288.2.1H- MR (400 MHz; DMSO-d6): delta 12.05 (bs, 1H), 8.79 (d, J= 4.5 Hz, 1H), 8.06 (dd, J= 9.2, 5.8 Hz, 1H), 7.94 (dd, J= 11.0, 2.8 Hz, 1H), 7.66-7.61 (m, 1H), 7.50 (d, J= 4.6 Hz, 1H), 2.41 (d, J= 7.6 Hz, 2H), 2.28- 2.23 (m, 1H), 1.87-1.78 (m, 2H), 1.73-1.64 (m, 6H).

The synthetic route of 541-16-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; BALOG, James Aaron; CHERNEY, Emily Charlotte; SHAN, Weifang; WILLIAMS, David K.; ZHANG, Liping; (87 pag.)WO2019/74822; (2019); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 541-16-2, A common heterocyclic compound, 541-16-2, name is Di-tert-Butyl malonate, molecular formula is C11H20O4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: Preparation of 2-ethylcyclopropane-1,1-dicarboxylic acid di-tert-butyl ester, shown below To a suspension of benzyltriethylammonium chloride (21.0 g, 92.2 mmol) in a 50% aqueous NaOH solution (92.4 g in 185 mL H2O) was added 1,2-dibromobutane (30.0 g, 138.9 mmol) and di-tert-butylmalonate (20.0 g, 92.5 mmol). The reaction mixture was vigorously stirred for 18 hours at room temperature and treated with a mixture of ice and water. The crude product was extracted with dichloromethane (3*) and sequentially washed with water (3*), and brine. The organic extracts were combined, dried (MgSO4), filtered, and concentrated in vacuo. The resulting residue was purified by flash column chromatography (100g SiO2, 3% diethyl ether in hexane) to provide the desired product (18.3 g, 67.8 mmol, 73% yield) which was used directly in the next reaction.

The synthetic route of 541-16-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bristol-Myers Squibb Company; US2009/304626; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics