Category: 4341-76-8

Some common heterocyclic compound, 4341-76-8, name is Ethyl 2-butynoate, molecular formula is C6H8O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C6H8O2

To a solution of (E)- and/or (Z)-N-hydroxy-3-fluoro-benzenecarboximidoyl chloride (11.1 g, 64 mmol) in diethylether (151 mL) was added ethyl 2-butynoate (7.2 g, 7.5 mL, 64 mmol) at 0 C. followed by the dropwise addition of triethylamine (7.8 g, 10.7 mL, 77 mmol) and the resulting mixture allowed to warm up to room temperature overnight. The mixture was then poured onto ice-water, and extracted with diethylether. The combined organic layers were then washed with water and brine, dried over sodium sulfate and evaporated. Purification by chromatography (SiO2, heptane:ethyl acetate=100:0 to 1:1) afforded the title compound (6.3 g, 39%) which was obtained as a white solid. MS: m/e=250.1 [M+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4341-76-8, its application will become more common.

Reference:
Patent; Buettelmann, Bernd; Jakob-Roetne, Roland; Knust, Henner; Lucas, Matthew C.; Thomas, Andrew; US2009/143371; (2009); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

4341-76-8, name is Ethyl 2-butynoate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Product Details of 4341-76-8

General procedure: In a 1 dram vial, methyl non-2-ynoate (88 mg, 1.0 equiv), 4-picoline (2.55 muL, 0.05equiv.), half the amount of bis(pinacolato)diboron (198 mg total, 1.5 equiv), and 1 mL of 1.3mg/mL CuSO4 stock solution (0.01 equiv.) are mixed and stirred vigorously at 50 C. The remaining half of bis(pinacolato)diboron is added over a period of 10 minutes. After 3 hours, 1mL of hexanes is added to quench the reaction. The aqueous layer is extracted 3x with hexanes. The hexanes layer is washed 5x with water, dried over sodium sulfate, filtered, and concentrated in vacuo. Column chromatography is used to purify the product.

The synthetic route of 4341-76-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Peck, Cheryl L.; Calderone, Joseph A.; Santos, Webster L.; Synthesis; vol. 47; 15; (2015); p. 2242 – 2248;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 4341-76-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4341-76-8, name is Ethyl 2-butynoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of 2-aminopyridine (0.1mmol), alkynoate (0.1mmol) and AgSO3CF3 (30mol%) in chlorobenzene (0.8mL) was stirred at 120C for 24h. After the reaction was finished, water (5mL) was added and the solution was extracted with ethyl acetate (3×5mL), the combined extract was dried with anhydrous MgSO4. Solvent was removed, and the residue was separated by column chromatography to give the pure sample.

The synthetic route of Ethyl 2-butynoate has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chen, Zhengwang; Wen, Yuelu; Ding, Hao; Luo, Guotian; Ye, Min; Liu, Liangxian; Xue, Jun; Tetrahedron Letters; vol. 58; 1; (2017); p. 13 – 16;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 4341-76-8, name is Ethyl 2-butynoate, molecular formula is C6H8O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C6H8O2

00727] (i) Production of ethyl 2-methylpyrazolo[l,5-a]pyridine-3-carboxylate [00728] To a suspension of 1-aminopyridinium iodide (125 g, 0.56 mmol) in N,N-dimethylformamide (1.2 L) were added ethyl 2-butynoate (54.0 g, 0.48 mmol) and potassium carbonate (79 g, 0.56 mmol) and the mixture was stirred at room temperature for 3 days. The reaction mixture was diluted with water (500 mL), ethyl acetate (500 mL) and hexane (500 mL), and the precipitated solid was collected by filtration, and washed with water (500 mL). The filtrate was extracted with a mixed solvent (1.5 L x 2) of ethyl acetate/hexane (1: 1) and dried over anhydrous magnesium sulfate, and the insoluble material was filtered off. The residue obtained by concentration of the filtrate and the solid collected by filtration in the above were combined, washed with diethyl ether (25 mL) and hexane (25 mL) and dried to give the title compound (36.0 g, 37%) as a white solid. The washing solution was concentrated, and the obtained residue was washed with diethyl ether (10 mL) and hexane (10 mL) and dried to give a second crop (11.0 g, 11%) of the title compound as a white solid. The washing solution of the second crop was concentrated, and the obtained residue was purified using a pad (elution solvent: ethyl acetate/hexane=l/l) with silica gel and activated carbon in 2 layers, washed with diethyl ether (5.0 mL) and hexane (5.0 mL) and dried to give a third crop (6.5 g, 7%) of the title compound as a white solid (total yield 55%).[00729] 1H-NMR (DMSOd6, 300 MHz) delta 1.35 (3H, t, J = 7.2 Hz), 2.57 (3H, s), 4.30 (2H, q, J = 7.2 Hz), 7.09 (IH, dt, J = 1.5, 6.9 Hz), 7.49 – 7.61 (IH, m), 8.00 (IH, td, J = 1.3 Hz), 8.75 (IH, td, J = 1.0, 6.9 Hz).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4341-76-8, its application will become more common.

Reference:
Patent; MILLENNIUM PHARMACEUTICALS, INC.; TAKEDA PHARMACEUTICAL COMPANY LIMITED; BANNO, Hiroshi; HIROSE, Masaaki; KURASAWA, Osamu; LANGSTON, Steven, P.; MIZUTANI, Hirotake; SHI, Zhan; VISIERS, Irache; VOS, Tricia, J.; VYSKOCIL, Stepan; WO2010/90716; (2010); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 4341-76-8, name is Ethyl 2-butynoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: Ethyl 2-butynoate

General procedure: To a solution of 2-aminoaryl carbonyl 1 (0.5 mmol), MCM-41-PPh3-AuCl (128 mg, 0.05 mmol), AgOTf (12.9 mg, 0.05 mmol) in DMF (5 mL) was added internal alkyne 2 (0.75 mmol) under Ar. The reaction mixture was stirred at 100C for 4 h (TLC monitored). The resulting mixture was then diluted with ethyl acetate (20 mL) and filtered. The gold catalyst was washed with NH3·H2O (2 × 5 mL), distilled water (5 mL), and acetone (2 × 5 mL) and reused in the next run. The filtrate was washed with water (2 × 10 mL) and brine (2 × 10 mL), and the organic layers were dried over MgSO4, filtered, and concentrated under reduced pressure. The residue was purified by chromatography on silica gel (eluent: petroleum ether/ethyl acetate = 15/1) to afford the desired product 3.

The synthetic route of Ethyl 2-butynoate has been constantly updated, and we look forward to future research findings.

Reference:
Article; Hu, Wenli; Yang, Weisen; Yan, Tao; Cai, Mingzhong; Synthetic Communications; vol. 49; 6; (2019); p. 799 – 813;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 4341-76-8, name is Ethyl 2-butynoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C6H8O2

Compound A (ethyl 2-butynoate, 1.12 g, 10 mmol) was dissolved in tetrahydrofuran.Add N,O-dimethylhydroxylamine hydrochloride (1.94 g, 20 mmol),Cool to -40 C,Isopropylmagnesium chloride (2M/L, 15 mL, 30 mmol) was added and reacted for 1 h.The reaction was completed, quenched with water, ethyl acetate (200 mL¡Á3), and brine (100 mL¡Á6)Concentrated under reduced pressure and purified by silica gel column chromatographyCompound B (colorless oil, 1.15 g, 91%).

The synthetic route of Ethyl 2-butynoate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Lanzhou University; Tu Yongqiang; Zhang Qing; (20 pag.)CN109666030; (2019); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In an article, author is An, Hyun-Jin, once mentioned the application of 4341-76-8, Quality Control of Ethyl 2-butynoate, Name is Ethyl 2-butynoate, molecular formula is C6H8O2, molecular weight is 112.1265, MDL number is MFCD00015182, category is esters-buliding-blocks. Now introduce a scientific discovery about this category.

Synthesis and Biological Evaluation of Water-Soluble Oleanolic Acid Derivatives for use as Melanogenesis Inhibitors

This study was focused on the synthesis of methoxy polyethylene glycol-oleanolic acid ester (mPEG-OA derivative) and investigation of its water solubility and anti-melanogenic effects. mPEG-OA derivative was identified by H-1 and C-13 NMR and FT-IR spectroscopic measurements. The water solubilities of mPEG-OA derivative and OA were found to be 13 and 0.013 mg/mL and that of mPEG-OA was found to be 1000-fold higher than that of OA. The effects of mPEG-OA derivative and OA on cell viability were measured using B16F10 melanoma cells. The viability of cells treated with mPEG-OA derivative (250 mu M) increased 4-fold compared to that of cells treated with OA (62.5 mu M). At mPEG-OA derivative and OA concentrations where the cell viability was unaffected, the inhibitory effect of mPEG-OA derivative and OA on the melanogenesis in B16F10 melanoma cells were 36 and 35% at 50 and 10 mu M, respectively. The expression level of microphthalmia-associated transcription (MITF) was also reduced in B16F10 melanoma cells treated with mPEG-OA and OA. Overall, mPEG-OA derivative showed excellent water solubility and inhibitory effects of the melanogenesis, which could be used as a potential formulation for use in whitening functional cosmetic material.

If you are interested in 4341-76-8, you can contact me at any time and look forward to more communication. Quality Control of Ethyl 2-butynoate.

Chemistry, like all the natural sciences, begins with the direct observation of nature— in this case, of matter.4341-76-8, Name is Ethyl 2-butynoate, SMILES is CC#CC(OCC)=O, belongs to esters-buliding-blocks compound. In a document, author is Khan, Mehebub Ali, introduce the new discover, Recommanded Product: Ethyl 2-butynoate.

A solvent sensitive coumarin derivative coupled with gold nanoparticles as selective fluorescent sensor for Pb2+ ions in real samples

A coumarin based fluorescent molecule, 3-amino-2-cynano-3-( 7-diethylamino-2-oxo-2H-chromen-3-yl)-acrylic acid ethyl ester (1) has been synthesized and characterised. Photophysical studies of 1 exhibit polarity dependent shift of its emission maxima which have been explained on the basis the existence of polar excited state of the molecule. Combination of compound 1 and citrate capped AuNPs (AuNPs/1 conjugate) has been used as a sensing tool for heavy metals. AuNPs/1 conjugate has been found to detect Pb2+ selectively by naked-eye color change as well as fluorescence enhancement. On addition of molecule 1 to gold nanoparticles solution, the color of the solution becomes reddish followed by quenching in fluorescence intensity. With gradual addition of Pb2+, the solution of AuNPs/1 conjugate becomes violet accompanied by a fluorescence enhancement. Excited state lifetime measurement revealed that compound 1 exhibits very fast decay pattern in aqueous medium whereas in AuNPs medium the lifetime of 1 increases. Upon addition of Pb2+ ions to that AuNPs/1 solution the lifetime of 1 decreases again. Based on the experimental observations the mechanism of sensing of lead has been proposed thoroughly. Initially compound 1 gets absorbed on the surface of the spherical gold nanoparticles. When Pb2+ is added, probably gold nanoparticles aggregates to form bigger particles by releasing compound 1 from its surface to show fluorescence enhancement. (C) 2020 Elsevier B.V. All rights reserved.

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 4341-76-8 is helpful to your research. Recommanded Product: Ethyl 2-butynoate.

Chemistry is the experimental and theoretical study of materials on their properties at both the macroscopic and microscopic levels. 4341-76-8, Name is Ethyl 2-butynoate, molecular formula is C6H8O2. In an article, author is Ho, Su Ann,once mentioned of 4341-76-8, Quality Control of Ethyl 2-butynoate.

Optimization of Ganciclovir use in allogeneic hematopoietic cell transplant recipients – the role of therapeutic drug monitoring

Introduction: Cytomegalovirus (CMV) is an opportunistic infectious complication that can occur after allogeneic hematopoietic cell transplantation (HCT). The mainstay of treatment and prevention of this infection is ganciclovir and its ester prodrug valganciclovir. There is conflicting evidence on the clinical utility of routine ganciclovir therapeutic drug monitoring (TDM) as a means to optimize treatment. Areas covered: This review aims to describe the current knowledge of the pharmacokinetic and pharmacodynamic characteristics of ganciclovir and valganciclovir, and to explore the evidence and challenges surrounding ganciclovir TDM within the allogeneic HCT cohort. Expert opinion: Ganciclovir TDM is important to optimize efficacy in selected patient groups where there are variable pharmacokinetic factors or inadequate response to treatment. However, defined pharmacokinetic exposures which correlate with treatment efficacy and toxicity remain elusive. Prospective clinical studies in specific patient groups are required to clarify this issue. Alternative TDM targets such as the intracellular ganciclovir triphosphate should be explored as they may prove to have better correlation with clinical outcomes and adverse effects. With recent advances in CMV immune monitoring, novel approaches integrating TDM with specific CMV immune phenotyping in a predictive model will be advantageous in optimizing ganciclovir dosing by combining TDM with a risk stratification approach.

If you’re interested in learning more about 4341-76-8. The above is the message from the blog manager. Quality Control of Ethyl 2-butynoate.

Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. 4341-76-8, Name is Ethyl 2-butynoate, SMILES is CC#CC(OCC)=O, belongs to esters-buliding-blocks compound. In a document, author is Koehne, Ingo, introduce the new discover, Recommanded Product: Ethyl 2-butynoate.

Functionalised phosphonate ester supported lanthanide (Ln = La, Nd, Dy, Er) complexes

A series of phosphonate ester supported lanthanide complexes bearing functionalities for subsequent immobilisation on semiconductor surfaces are prepared. Six phosphonate ester ligands (L1-L6) with varying aromatic residues are synthesised. Subsequent complexation with lanthanide chloride or -nitrate precursors (Ln = La, Nd, Dy, Er) affords the corresponding mono- or dimeric lanthanide model complexes [LnX(3)(L1-L3 or L5-L6)(3)](n) (X = NO3, Cl; n = 1 (Nd, Dy, Er), 2 (La, Nd)) or [LnCl(2)Br(L4-Br)(2)(L4-Cl)](n) (n = 1 (Nd, Dy, Er), 2 (La, Nd)) (1-32). All compounds are thoroughly characterised, and their luminescence properties are investigated in the visible and NIR spectral regions, where applicable.

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 4341-76-8 is helpful to your research. Recommanded Product: Ethyl 2-butynoate.