Category: 394-35-4

Reference of 394-35-4, A common heterocyclic compound, 394-35-4, name is Methyl 2-fluorobenzoate, molecular formula is C8H7FO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a reactor under nitrogen atmosphere was added a toluene solution of ester 6 (LOO Wt, 1.0 eq), methyl 2-fluorobenzoate (0.91 Wt, 0.75 Vol 1.10 eq)5 and THF (0.53 Wt, 1.8 Vol). The solution was cooled to below -70 C. Lithium hexamethyldisilazide (LiHMDS, 1.0M in THF, 7.6 Wt, 8.6 Vol, 1,6 eq) was added at such rate that the internal temperature does not exceed -60°C.. After completion of the LiHMDS addition, the mixture was warmed (rate between 10-20C/h) and stirred at -40C for 1h. The reaction was monitored by GC (Conversion Target >95percent). If after 4h the conversion is still under targeted amount, additional LiHMDS 1M in THF was added (1.1 eq based on unreacted starting material). After achieving the target conversion, the internal temperature was raised (rate between 20-30°C/h) to 15 to 20 °C. 25 wtpercent aqueous ammonium chloride (1,7 Wt, 1.6 Vol) was added to the reactor keeping the internal temperature below 0 °C Upon completion of the addition, the mixture was warmed to ?0°C, and transferred to a vessel containing 25 wtpercent aqueous ammonium chloride (4.4 Wt, 4.1 Vol) and water (1.1 Wt, 1.1 Vol).The mixture was stirred for at least 30 min at 20-25 °C. The lower aqueous layer was removedand the organic layer was washed with 20 wt percent aqueous sodium chloride (3.0 Wt, 1.4 Vol). The mixture was stirred for at least 15 minutes then allowed to settle. The lower aqueous layer was removed. The organic phase was concentrated under reduce pressure (Jacket < 25 °C) untildistillation ceases. Toluene (6.6 Wt, 6.7 Vol) was added and the resulting mixture was washedwith water (3.0 Wt, 3.0 Vol), stirred for at least 15 min, then allowed to settle. The organics werewashed with water (3.0 Wt, 3.0 Vol) until pH is constant at pH=78. The organic phase was washed with 20percent aqueous sodium chloride (3.0 Wt, 1.4 Vol). The organic phase was concentrated under reduced pressure (jacket <25°C) to afford ketoester 11 (2.1 Wt) as an orangeoil. The synthetic route of 394-35-4 has been constantly updated, and we look forward to future research findings. Reference:
Patent; ???????????????????????????; ? Buranko; Kimu ?; Chan ?; ?; Yoshizawa Kazuhiro; (94 pag.)JP2016/121177; (2016); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Synthetic Route of 394-35-4, A common heterocyclic compound, 394-35-4, name is Methyl 2-fluorobenzoate, molecular formula is C8H7FO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

N-(Pyrrolidin-3-yl methyl)-2-(4-chlorophenyl)-4-methylthiazole-5-carboxamide (168 mg, 0.500 mmol) and methyl 2-fluorobenzoate (0.127 mL, 1.00 mmol) were dissolved in dimethylsulfoxide (4 mL). To this solution, potassium carbonate (138 mg, 1.00 mmol) and tetrabutylammonium iodide (18.5 mg, 0.0500 mmol) were added and the mixture was stirred at 140°C for 6 hours. Subsequently, the reaction mixture was allowed to cool and water was added. The mixture was then extracted with ethyl acetate and the extract was washed with brine, followed by drying over magnesium sulfate and evaporation of the solvent. Purification of the resulting residue by silica gel column chromatography (hexane: ethyl acetate = 4:1 -> 2:1) gave 136 mg (58percent) of the desired compound as a colorless amorphous product. 1H NMR (400 MHz, CDCl3) delta 1.77-1.86 (1H, m), 2.11-2.19 (1H, m), 2.60-2.67 (1H, m), 2.71 (3H, s), 3.21-3.38 (4H, m), 3.54 (2H, t, J= 6.1 Hz), 3.87 (3H, s), 6.26 (1H, t, J = 6.1 Hz), 6.78 (1H, t, J = 7.9 Hz), 6.82 (1H, d, J = 8.6 Hz), 7.32-7.36 (1H, m), 7.41 (2H, d, J = 8.6 Hz), 7.63 (1H, dd, J = 1.8, 7.3 Hz), 7.85 (2H, d, J = 8.6 Hz). FAB+(m/z): 470 (M+H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; KYORIN PHARMACEUTICAL CO., LTD.; EP1780210; (2007); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 394-35-4, name is Methyl 2-fluorobenzoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Product Details of 394-35-4

A mixture of 20.0 g of methyl 2-fluorobenzoate, 15.2 g of methyl thioglycolate, 21.8 g of potassium carbonate,and 150 ml of N,N-dimethylformamide was stirred for 4 hours at 60°C. After the reaction mixture was cooled to roomtemperature, water was added thereto, and the residue was washed three times with tert-butyl methyl ether. Concentratedhydrochloric acid was added to the aqueous layer, and then extraction was performed three times by using tert-butylmethyl ether. The collected organic layer was washed with water and saturated saline, dried over magnesium sulfate,and then concentrated under reduced pressure. The residues were recrystallized from ethanol and water, therebyobtaining 3.89 g of methyl 3-hydroxybenzo[b]thiophene-2-carboxylate.

The synthetic route of 394-35-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sumitomo Chemical Company Limited; MUKUMOTO, Fujio; TAMAKI, Hiroaki; KUSAKA, Shintaro; IWAKOSHI, Mitsuhiko; EP2926660; (2015); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 394-35-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 394-35-4 name is Methyl 2-fluorobenzoate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: Compounds 6a-t were synthesized from substituted benzoic acid via six steps according to the literature method as described. Various substituted benzoic acids 1a-t were treated with SOCl2 to give compounds 2a-t, which were reacted with CH3OH and EtN3 in CH2Cl2 at 0 to afford compounds 3a-t. Compounds 4a-t were prepared by the reaction of compounds 3a-t, hydrazine hydrate in CH3OH under reflux condition about 5h. Subsequently, compounds 5a-t were obtained by reaction of compounds 4a-t with CS2 and KOH in CH3OH. Compounds 6a-t were obtained by the cyclization reaction of compounds 5a-t in the presence of HCl at 0-5°C.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 2-fluorobenzoate, and friends who are interested can also refer to it.

Reference:
Article; Li, Liangjing; Ding, Hao; Wang, Baogang; Yu, Shichong; Zou, Yan; Chai, Xiaoyun; Wu, Qiuye; Bioorganic and Medicinal Chemistry Letters; vol. 24; 1; (2014); p. 192 – 194;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 394-35-4 as follows. name: Methyl 2-fluorobenzoate

0.06 mol of methyl o-fluorobenzoate,0.022 mol DIC,6.6 mmol DMAP was added to 100 mL dichloromethane, Stirring to continue stirring at room temperature for 30min,Gradually warming to 45 ~ 50 ,The reaction flask was charged with 1-cyclopropanecarbonylpiperazine (0.08 mol)Continue stirring reaction 9 ~ 10h.After the reaction is completed,Cool to 0 C and stir 45min,filter,The filtrate was washed with water (3 * 50 mL)Dried over anhydrous sodium sulfate,The methylene chloride was evaporated under reduced pressure,Got solid,Compound 2 (15.27 g),The yield is 92.57%.

According to the analysis of related databases, 394-35-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Shandong Yuxin Pharmaceutical Co., Ltd.; Liu Zhenteng; Sun Yiwei; Li Zhen; Xu Guichao; Leng Xiangxiang; Huang Chunyan; (9 pag.)CN107266370; (2017); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

394-35-4, name is Methyl 2-fluorobenzoate, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of Methyl 2-fluorobenzoate

Preparation Example 196 To a solution of 1.0 g of tert-butyl (3S)-piperidin-3-yl carbamate in 20 ml of DMF were added 0.77 ml of methyl 2-fluorobenzoate and 1.4 g of potassium carbonate, followed by stirring at 130° C. overnight. After leaving to be cooled, to the reaction mixture were added water and ethyl acetate to carry out a layer separation operation. The organic layer was washed with saturated brine and dried over anhydrous magnesium sulfate, and the solvent was evaporated under reduced pressure. The obtained residue was purified by silica gel column chromatography to obtain 590 mg of methyl 2-{(3S)-3-[(tert-butoxycarbonyl)amino]piperidin-1-yl}benzoate.

The synthetic route of 394-35-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTELLAS PHARMA INC.; KOGA, Yuji; MAENO, Kyoichi; SATO, Ippei; IMAMURA, Yoshimasa; HANAZAWA, Takeshi; IIDA, Maiko; OHNE, Kazuhiko; IMAMURA, Kenichiro; WATANABE, Tsubasa; NOZAWA, Eisuke; SHIBATA, Hiroshi; US2014/88080; (2014); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Electric Literature of 394-35-4, The chemical industry reduces the impact on the environment during synthesis 394-35-4, name is Methyl 2-fluorobenzoate, I believe this compound will play a more active role in future production and life.

To methyl 2-fluorobenzoate (300 mg) in 9 mL of THF was added NaHMDS (5.2 mL, 1 M in THF) at -78°C. To this mixture was then added (4-chloro-2-fluorophenyl)acetic acid (367 mg) as solid in one portion at -78°C. The mixture was stirred at -78°C for 4 h and then quenched with 3 N HC1 at this temperature and stirred at rt for overnight. The mixture was diluted with ethyl acetate and water. The organic layer was dried and concentrated to remove solvents. The afforded residue was purified by silica gel flash chromatography (0 to 100percent EtOAc/hexane, product out at 25percent) to give the desired product 2-(4-Chloro-2-fluorophenyl)-l-(2- fluorophenyl)ethanone as white solid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-fluorobenzoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LAN, Ping; LIU, Kun; OGAWA, Anthony; SHEN, Hong; YANG, Christine; WANG, Yuguang; BERESIS, Richard; QI, Changhe; WO2012/139495; (2012); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 394-35-4, A common heterocyclic compound, 394-35-4, name is Methyl 2-fluorobenzoate, molecular formula is C8H7FO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a reactor under nitrogen atmosphere was added a toluene solution of ester 6 (LOO Wt, 1.0 eq), methyl 2-fluorobenzoate (0.91 Wt, 0.75 Vol 1.10 eq)5 and THF (0.53 Wt, 1.8 Vol). The solution was cooled to below -70 C. Lithium hexamethyldisilazide (LiHMDS, 1.0M in THF, 7.6 Wt, 8.6 Vol, 1,6 eq) was added at such rate that the internal temperature does not exceed -60°C.. After completion of the LiHMDS addition, the mixture was warmed (rate between 10-20C/h) and stirred at -40C for 1h. The reaction was monitored by GC (Conversion Target >95percent). If after 4h the conversion is still under targeted amount, additional LiHMDS 1M in THF was added (1.1 eq based on unreacted starting material). After achieving the target conversion, the internal temperature was raised (rate between 20-30°C/h) to 15 to 20 °C. 25 wtpercent aqueous ammonium chloride (1,7 Wt, 1.6 Vol) was added to the reactor keeping the internal temperature below 0 °C Upon completion of the addition, the mixture was warmed to ?0°C, and transferred to a vessel containing 25 wtpercent aqueous ammonium chloride (4.4 Wt, 4.1 Vol) and water (1.1 Wt, 1.1 Vol).The mixture was stirred for at least 30 min at 20-25 °C. The lower aqueous layer was removedand the organic layer was washed with 20 wt percent aqueous sodium chloride (3.0 Wt, 1.4 Vol). The mixture was stirred for at least 15 minutes then allowed to settle. The lower aqueous layer was removed. The organic phase was concentrated under reduce pressure (Jacket < 25 °C) untildistillation ceases. Toluene (6.6 Wt, 6.7 Vol) was added and the resulting mixture was washedwith water (3.0 Wt, 3.0 Vol), stirred for at least 15 min, then allowed to settle. The organics werewashed with water (3.0 Wt, 3.0 Vol) until pH is constant at pH=78. The organic phase was washed with 20percent aqueous sodium chloride (3.0 Wt, 1.4 Vol). The organic phase was concentrated under reduced pressure (jacket <25°C) to afford ketoester 11 (2.1 Wt) as an orangeoil. The synthetic route of 394-35-4 has been constantly updated, and we look forward to future research findings. Reference:
Patent; ???????????????????????????; ? Buranko; Kimu ?; Chan ?; ?; Yoshizawa Kazuhiro; (94 pag.)JP2016/121177; (2016); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 394-35-4, A common heterocyclic compound, 394-35-4, name is Methyl 2-fluorobenzoate, molecular formula is C8H7FO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

N-(Pyrrolidin-3-yl methyl)-2-(4-chlorophenyl)-4-methylthiazole-5-carboxamide (168 mg, 0.500 mmol) and methyl 2-fluorobenzoate (0.127 mL, 1.00 mmol) were dissolved in dimethylsulfoxide (4 mL). To this solution, potassium carbonate (138 mg, 1.00 mmol) and tetrabutylammonium iodide (18.5 mg, 0.0500 mmol) were added and the mixture was stirred at 140°C for 6 hours. Subsequently, the reaction mixture was allowed to cool and water was added. The mixture was then extracted with ethyl acetate and the extract was washed with brine, followed by drying over magnesium sulfate and evaporation of the solvent. Purification of the resulting residue by silica gel column chromatography (hexane: ethyl acetate = 4:1 -> 2:1) gave 136 mg (58percent) of the desired compound as a colorless amorphous product. 1H NMR (400 MHz, CDCl3) delta 1.77-1.86 (1H, m), 2.11-2.19 (1H, m), 2.60-2.67 (1H, m), 2.71 (3H, s), 3.21-3.38 (4H, m), 3.54 (2H, t, J= 6.1 Hz), 3.87 (3H, s), 6.26 (1H, t, J = 6.1 Hz), 6.78 (1H, t, J = 7.9 Hz), 6.82 (1H, d, J = 8.6 Hz), 7.32-7.36 (1H, m), 7.41 (2H, d, J = 8.6 Hz), 7.63 (1H, dd, J = 1.8, 7.3 Hz), 7.85 (2H, d, J = 8.6 Hz). FAB+(m/z): 470 (M+H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; KYORIN PHARMACEUTICAL CO., LTD.; EP1780210; (2007); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Reference of 394-35-4,Some common heterocyclic compound, 394-35-4, name is Methyl 2-fluorobenzoate, molecular formula is C8H7FO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5-amino-4-methylpyrimidine (5g, 45 mmol) was dissolved in 200 mL THF and cooled to -20°C. A solution of n-BuLi (112.5 mmol) was added over 10 minutes and the solution was kept at -20°C for 30 min, then warmed to room temp and stirred for 3h. It was then cooled to -40°C and to it was added methyl-2-fluorobenzoate (1.75 mL, 13.7 mmol) and the solution stirred at -40°C for 30 min and then warmed to room temp for lh. 50 mL of methanol was then added over 5 min, followed by 6N aq HC1. The solution was stirred for 18h at room temp. It was then neutralized with NaHC03 to pH 8 and then diluted with ethyl acetate and water. The organics were washed with water three times and then brine and dried over sodium sulfate and concentrated in vacuo.The crude material was purified by flash chromatography using 10percent methanol/ DCM. 1.5 g of product was isolated as a yellow solid (16percent). 1H-NMR: (<3/4-DMSO, 400 MHz) delta 12.22 (s, 1H), 8.86 (s, 1H), 8.83 (s, 1H), 7.98(dt, 1H), 7.46 (m, 1H), 7.38 (m, 2H), 7.02(s, 1H) LC/MS: calculated for Ci2H8FN3: 213.2; found 214.10 (M+H)+. These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Methyl 2-fluorobenzoate, its application will become more common. Reference:
Patent; GILEAD SCIENCES, INC.; BJORNSON, Kyla; BONDY, Steven, S.; CHOI, You-chul; CHOU, Chien-hung; MISHRA, Ruchika; TRENKLE, James, D.; TSE, Winston, C.; VIVIAN, Randall, W.; WO2011/146817; (2011); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics