Category: 34846-90-7

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 34846-90-7, name is Methyl 3-methoxyacrylate, A new synthetic method of this compound is introduced below., Computed Properties of C5H8O3

Reference Production Example 1 (0548) A mixture of 21.1 g of methyl 3-methoxyacrylate, 10.0 g of hydrazine hydrate, and 20 mL of methanol was stirred with heating under reflux for 2 hours. The reaction mixture was concentrated under reduced pressure to obtain 11.0 g of 1H-pyrazol-3-ol. 1H-pyrazol-3-ol (0549) (0550) 1H-NMR (DMSO-d6) delta (ppm): 10.22 (1H, s), 7.35 (1H, d, J=2.2 Hz), 5.43 (1H, d, J=2.2 Hz)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SUMITOMO CHEMICAL COMPANY, LIMITED; HOU, Zengye; TAKAHASHI, Teruki; (156 pag.)US2016/174558; (2016); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 34846-90-7, name is Methyl 3-methoxyacrylate, A new synthetic method of this compound is introduced below., Product Details of 34846-90-7

1.70 g (10 mmol) of 4-cyanophenylhydrazine hydrochloride, 1.16 g (10 mmol) of methoxypropan-2-ol were added to a three-necked reaction flaskMethylene chloride, 10 mL of methanol. The temperature of the reaction mixture was raised to reflux for about 6 hours. The reaction solution was quantitated by liquid chromatography, and 1- (4-cyanoPhenyl) -5-hydroxypyrazole Yield 64.2percent

The synthetic route of 34846-90-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Hunan Haili Changde Agrochemical Co.,Ltd.; Hu, Zhibin; Liu, Weidong; Du, Shenghua; Huang, Chaoqun; Lan, Shilin; Xiong, Lili; Wu, Yinyin; Cheng, Chao; Wang, Yanli; (6 pag.)CN104059020; (2016); B;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

34846-90-7, Name is Methyl 3-methoxyacrylate, 34846-90-7, belongs to esters-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

To three reaction bottles were added 10.8 g (100 mmol) of phenylhydrazine, 11.6 g (100 mmol) of methyl methacrylate,100 mL of methanol. The temperature of the reaction mixture was raised to reflux for about 6 hours. The reaction liquid was quantified by liquid chromatography, and 1-phenyl-5-hydroxypyrazoleYield 85.7percent.

Statistics shows that Methyl 3-methoxyacrylate is playing an increasingly important role. we look forward to future research findings about 34846-90-7.

Reference:
Patent; Hunan Haili Changde Agrochemical Co.,Ltd.; Hu, Zhibin; Liu, Weidong; Du, Shenghua; Huang, Chaoqun; Lan, Shilin; Xiong, Lili; Wu, Yinyin; Cheng, Chao; Wang, Yanli; (6 pag.)CN104059020; (2016); B;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 34846-90-7, name is Methyl 3-methoxyacrylate, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 34846-90-7

EXAMPLE 2 The toluene solution of 3-mercapto-2-butanone from the previous step (613 g of ca. 25 wt percent solution) was placed in a clean, dry reactor along with 15 g of methyl-3-methoxyacrylate. The mixture was warmed to 25¡ã C., stirred vigorously, and treated with solid sodium methoxide (8.5 g, ca. 0.1 equiv.) all at once. The remaining methyl-3-methoxyacrylate (151 g) was added in at a rate to keep the temperature at or below 35¡ã C. (2 h). The resulting mixture was allowed to reach room temperature and stir for 21 h. Concentrated hydrochloric acid (88 g) was added to the mixture over 30 min such that the temperature did not exceed 35¡ã C. The resulting mixture was stirred vigorously for 2 h, then treated with 73 g of water, and stirred for 10 min more. The phases were allowed to separate. After standing for 10 min, the aqueous phase was drained from the reactor, and the upper, product phase was washed with 100 g of 5percent sodium bicarbonate solution. After being stirred for 15 min, the phases were allowed to separate. The lower, aqueous phase was drained from the reactor, and the upper, product phase was transferred to a distilling flask. The toluene was distilled through a 5-plate distillation column at 100 mmHg. After a small fraction containing toluene and other low boiling impurities was collected, the product, 3-carbomethoxy-4,5-dimethylthiophene, was distilled through the column at 50 mmHg.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 34846-90-7.

Reference:
Patent; Monsanto Company; US6037478; (2000); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

34846-90-7, These common heterocyclic compound, 34846-90-7, name is Methyl 3-methoxyacrylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 1-L round-bottom flask was charged with /ert-butyl 4-oxopiperidine-l- carboxylate (Sigma Aldrich, 20.0 g, 100 mmol) and purged with nitrogen. THF (57 ml) was introduced, and the resultant solution cooled to -78 ¡ãC in a dry ice-acetone bath. A solution of potassium /ert-butoxide (1.6 M in THF, 80 mL, 128 mmol, 1.28 equiv) was added to the reaction mixture via syringe over 5 min. Following addition, the reaction mixture was allowed to warm to 0 ¡ãC in an ice-water bath. After 30 min, the peach colored reaction mixture was cooled to -78 ¡ãC. Methyl 3-methoxyacrylate (22.8 mL, 212 mmol, 2.11 equiv) was added dropwise to the reaction mixture via syringe over 5 min. Following addition, the reaction mixture was allowed to warm to ambient temperature. After 2 h, the resultant red reaction mixture was cooled was cooled to -78 ¡ãC. N-phenyl bis-trifluoromethane sulfonimide (56.7 g, 159 mmol, 1.58 equiv) was added to the vigorously stirred, cooled reaction mixture in one portion and the resultant reaction mixture was subsequently allowed to warm to 0 ¡ãC in an ice-water bath. After 1 h, saturated aqueous sodium bicarbonate solution (200 mL) and EtOAc (200 mL) were added to the reaction mixture, and the layers were separated. The aqueous layer was extracted with EtOAc (3150 mL), the combined organic layers were dried over anhydrous sodium sulfate, filtered, and concentrated under reduced pressure. The residue was purified by flash column chromatography in two portions (340-g silica gel Biotage column, eluent: gradient, 0 to 30percent EtOAc in heptane with 1percent Et3N as an additive) to afford (E)-tert-butyl 3-(3-methoxy-3-oxoprop-1-en-1-yl)-4-(((trifluoromethyl)sulfonyl)oxy)-5,6-dihydropyridine-1(2H)-carboxylate (38.0 g, 91 mmol, 91percent yield) as a off-white solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 34846-90-7.

Reference:
Patent; USA Anjin Corporation; M .weisi; B .C.miergelamu; T .dining; J .siteerwogen; A .gusiman-peileisi; A .beiqiao; I .E.makesi; (177 pag.)CN107531705; (2018); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

34846-90-7, Adding a certain compound to certain chemical reactions, such as: 34846-90-7, name is Methyl 3-methoxyacrylate, belongs to esters-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 34846-90-7.

Under nitrogen protection, add 12.9g (323.5mmol) of NaH and 150g of DMF to the reaction flask at -15-10¡ãC.4-amino-1,1,1-trifluoro-3-buten-2-one50 g (359.5 mmol) solution, the system turned from colorless to light yellow and finally to a red suspension,Methyl 3-methoxyacrylate (41.75 g, 359.5 mmol) was added dropwise and reacted at this temperature for 3 hours.Concentrated hydrochloric acid was added dropwise to the reaction flask at -10¡ãC to adjust the pH of 8-9. The system changed from a deep red suspension to orange, and water was added.1.5L of dilute hydrochloric acid was used to adjust the pH to 1 to 2, and a large amount of white flocculent solids precipitated. After stirring for 0.5 hours, 81.5 g of a white product was obtained by filtration (yield, 88.3percent).The NMR analysis of the product obtained in this example is shown in Figure 1.Prove that the resulting product isN-1-methoxy-2-methoxycarbonylethyl-4,4,4-trifluoro-3-keto-1-butenamine..

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 3-methoxyacrylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Shanghai Heteng Fine Chemical Co., Ltd.; Chen Sheng; Shi Guancheng; Meng Haicheng; (8 pag.)CN107628991; (2018); A;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics