Category: 14920-81-1

Some common heterocyclic compound, 14920-81-1, name is Methyl 2,6-dimethylbenzoate, molecular formula is C10H12O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C10H12O2

General procedure: To a flame-dried 250 mL round-bottom flask under argon wereadded 4 (8.02 g, 28.4 mmol, 1 equiv), TMEDA (8.71 mL, 58.2mmol, 2.05 equiv), and anhydrous n-hexane (28 mL). Theresulting solution was cooled in an ice bath and sec-butyllithium(1.4 M solution in cyclohexane, 42.0 mL, 58.2 mmol, 2.05equiv) was added dropwise. The ice bath was removed and thereaction mixture was stirred at room temperature for 4 h. Thereaction was cooled to -78 C and a solution of methyl 2,4,6-trimethylbenzoate (5.11 g, 28.7 mmol, 1.01 equiv) in anhydrousn-hexane (28 mL) was added slowly via cannula. After the addition,the mixture was allowed to slowly warm to room temperatureand stirred for 12 h. The reaction was quenched with water(25 mL) and the biphasic mixture was stirred vigorously for 30min. The mixture was diluted with Et2O (100 mL) and the layerswere separated. The organic layer was washed with water(2 × 150 mL) and brine (1 × 150 mL). The organic layer wastransferred to a 250 mL round-bottom flask equipped with astir bar. To the vigorously stirred solution was added conc. HCl(12 mL), resulting in a bright-yellow precipitate. The suspensionwas stirred vigorously for 30 min then diluted with water (150mL). The layers were separated and the organic layer wasextracted with water (3 × 150 mL or until the washings becomecolorless). To the combined aqueous layers was added solidNaBF4 (9.35 g, 85.2 mmol, 3 equiv), resulting in a bright-yellowprecipitate. The resulting suspension was extracted withdichloromethane (3 × 150 mL or until the washings become colorless).To the combined organic layers was added HBF4·Et2Ocomplex (3.46 mL, 28.4 mmol, 1 equiv). The solution wasswirled to achieve homogeneity then washed with water(1 × 100 mL) and aq. NaBF4 (1 M, 1 × 100 mL). The organic layerwas dried over solid NaBF4, filtered, and concentrated to dryness.The residue was purified by trituration with hexanes andfiltered. The solid was rinsed with n-pentane and dried in vacuoto give xanthylium 3 (10.6 g, 21.3 mmol, 75% yield) as a yelloworangesolid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 14920-81-1, its application will become more common.

Reference:
Article; White, Alexander R.; Wang, Leifeng; Nicewicz, David A.; Synlett; vol. 30; 7; (2019); p. 827 – 832;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Some common heterocyclic compound, 14920-81-1, name is Methyl 2,6-dimethylbenzoate, molecular formula is C10H12O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: Methyl 2,6-dimethylbenzoate

General procedure: To a flame-dried 250 mL round-bottom flask under argon wereadded 4 (8.02 g, 28.4 mmol, 1 equiv), TMEDA (8.71 mL, 58.2mmol, 2.05 equiv), and anhydrous n-hexane (28 mL). Theresulting solution was cooled in an ice bath and sec-butyllithium(1.4 M solution in cyclohexane, 42.0 mL, 58.2 mmol, 2.05equiv) was added dropwise. The ice bath was removed and thereaction mixture was stirred at room temperature for 4 h. Thereaction was cooled to -78 C and a solution of methyl 2,4,6-trimethylbenzoate (5.11 g, 28.7 mmol, 1.01 equiv) in anhydrousn-hexane (28 mL) was added slowly via cannula. After the addition,the mixture was allowed to slowly warm to room temperatureand stirred for 12 h. The reaction was quenched with water(25 mL) and the biphasic mixture was stirred vigorously for 30min. The mixture was diluted with Et2O (100 mL) and the layerswere separated. The organic layer was washed with water(2 × 150 mL) and brine (1 × 150 mL). The organic layer wastransferred to a 250 mL round-bottom flask equipped with astir bar. To the vigorously stirred solution was added conc. HCl(12 mL), resulting in a bright-yellow precipitate. The suspensionwas stirred vigorously for 30 min then diluted with water (150mL). The layers were separated and the organic layer wasextracted with water (3 × 150 mL or until the washings becomecolorless). To the combined aqueous layers was added solidNaBF4 (9.35 g, 85.2 mmol, 3 equiv), resulting in a bright-yellowprecipitate. The resulting suspension was extracted withdichloromethane (3 × 150 mL or until the washings become colorless).To the combined organic layers was added HBF4·Et2Ocomplex (3.46 mL, 28.4 mmol, 1 equiv). The solution wasswirled to achieve homogeneity then washed with water(1 × 100 mL) and aq. NaBF4 (1 M, 1 × 100 mL). The organic layerwas dried over solid NaBF4, filtered, and concentrated to dryness.The residue was purified by trituration with hexanes andfiltered. The solid was rinsed with n-pentane and dried in vacuoto give xanthylium 3 (10.6 g, 21.3 mmol, 75% yield) as a yelloworangesolid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 14920-81-1, its application will become more common.

Reference:
Article; White, Alexander R.; Wang, Leifeng; Nicewicz, David A.; Synlett; vol. 30; 7; (2019); p. 827 – 832;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

These common heterocyclic compound, 14920-81-1, name is Methyl 2,6-dimethylbenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C10H12O2

General procedure: To a flame-dried 250 mL round-bottom flask under argon wereadded 4 (8.02 g, 28.4 mmol, 1 equiv), TMEDA (8.71 mL, 58.2mmol, 2.05 equiv), and anhydrous n-hexane (28 mL). Theresulting solution was cooled in an ice bath and sec-butyllithium(1.4 M solution in cyclohexane, 42.0 mL, 58.2 mmol, 2.05equiv) was added dropwise. The ice bath was removed and thereaction mixture was stirred at room temperature for 4 h. Thereaction was cooled to -78 C and a solution of methyl 2,4,6-trimethylbenzoate (5.11 g, 28.7 mmol, 1.01 equiv) in anhydrousn-hexane (28 mL) was added slowly via cannula. After the addition,the mixture was allowed to slowly warm to room temperatureand stirred for 12 h. The reaction was quenched with water(25 mL) and the biphasic mixture was stirred vigorously for 30min. The mixture was diluted with Et2O (100 mL) and the layerswere separated. The organic layer was washed with water(2 × 150 mL) and brine (1 × 150 mL). The organic layer wastransferred to a 250 mL round-bottom flask equipped with astir bar. To the vigorously stirred solution was added conc. HCl(12 mL), resulting in a bright-yellow precipitate. The suspensionwas stirred vigorously for 30 min then diluted with water (150mL). The layers were separated and the organic layer wasextracted with water (3 × 150 mL or until the washings becomecolorless). To the combined aqueous layers was added solidNaBF4 (9.35 g, 85.2 mmol, 3 equiv), resulting in a bright-yellowprecipitate. The resulting suspension was extracted withdichloromethane (3 × 150 mL or until the washings become colorless).To the combined organic layers was added HBF4·Et2Ocomplex (3.46 mL, 28.4 mmol, 1 equiv). The solution wasswirled to achieve homogeneity then washed with water(1 × 100 mL) and aq. NaBF4 (1 M, 1 × 100 mL). The organic layerwas dried over solid NaBF4, filtered, and concentrated to dryness.The residue was purified by trituration with hexanes andfiltered. The solid was rinsed with n-pentane and dried in vacuoto give xanthylium 3 (10.6 g, 21.3 mmol, 75% yield) as a yelloworangesolid.

The synthetic route of Methyl 2,6-dimethylbenzoate has been constantly updated, and we look forward to future research findings.

Reference:
Article; White, Alexander R.; Wang, Leifeng; Nicewicz, David A.; Synlett; vol. 30; 7; (2019); p. 827 – 832;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Related Products of 14920-81-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 14920-81-1 name is Methyl 2,6-dimethylbenzoate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

EXAMPLE 2; Methyl 2-bromomethyl-6-methyl-benzoate; To a solution of methyl 2,6-dimethyl-benzoate (22.0 g, 134 mmol, example 1) in CCl4 (250 mL) is added N-bromo-succinimide (19 g, 107 mmol) followed by benzoyl peroxide (1.0 g, 4.0 p mmol). The resulting solution is warmed to reflux and stirred at this temperature for 20 min. The reaction mixture is then allowed to cool before being diluted with ether (200 mL), filtered and concentrated. The residue is purified by flash chromatography (silica, 4% acetone in hexanes) to give the title compound. This product (approx. 85% purity, remainder is methyl 2,6dimethyl benzoate) is used without further purification. MS (EI) 242, 244 (M+, Br pattern).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 2,6-dimethylbenzoate, and friends who are interested can also refer to it.

Reference:
Patent; Aventis Pharma Deutschland GmbH; US7005440; (2006); B1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics

Application of 14920-81-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 14920-81-1, name is Methyl 2,6-dimethylbenzoate belongs to esters-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of methyl 2,6-dimethylbenzoate (described in J. Am. Chem. Soc., 99, 6405 (1977); 23.4 g, 143 mmol) in dichloroethane (200 ml) were added N-bromosuccinimide (25.46 g, 143 mmol) and alpha,alpha’-azobisisobutyronitrile (234.8 mg, 1.43 mmol), and the mixture was irradiated with visible light (tungsten lamp, 375 W) for 1 hour. After cooling the reaction mixture, the precipitated material was filtered off, and the solvent was distilled off under reduced pressure. The obtained oily residue was subjected to chromatography on a silica gel (200 g) column (eluent; ethyl acetate : hexane = 1 : 10) to give an oily mixture containing ca. 50% methyl 2-(bromomethyl)-6-methylbenzoate. The mixture was dissolved in dimethyl sulfoxide (150 ml), and sodium acetate (16.4 g, 0.2 mol) was added thereto. The resulting mixture was stirred at room temperature for 2 hours, then a saturated aqueous solution of ammonium chloride was added thereto, and the product was extracted with ethyl acetate. The organic layer was washed with a saturated aqueous solution of sodium chloride, and the solvent was distilled off under reduced pressure to give an oily residue. The residue was subjected to chromatography on a silica gel (200 g) column (eluent; ethyl acetate : hexane = 1 : 10 ~ 1 : 3) to give methyl 2-(acetoxymethyl)-6-methylbenzoate (8.09 g, more than 80% content) as a colorless oil. The obtained methyl 2-(acetoxymethyl)-6-methylbenzoate was used for the following reaction without further purification. NMR spectrum (400 MHz, CDCl3) delta ppm: 2.07 (3H, s), 2.38 (3H, s), 3.92 (3H, s), 5.15 (2H, s), 6.99-7.12 (3H, m). Methyl 2-(acetoxymethyl)-6-methylbenzoate obtained above was dissolved in methanol (80 ml), and potassium carbonate (251.5 mg, 1.8 mmol) was added thereto. The mixture was stirred at room temperature for 2 hours, then a 2N aqueous solution of hydrochloric acid (3 ml) was added thereto, and the solvent was distilled off under reduced pressure. The obtained solid residue was dissolved in ethyl acetate, and the solution was washed with a saturated aqueous solution of sodium chloride and then the solvent was distilled off under reduced pressure. The solid residue was subjected to chromatography on a silica gel (100 g) column (eluent; ethyl acetate : hexane = 1 : 2) to afford 7-methyl-1(3H)-isobenzofuranone (5.18 g, more than 80% content). The obtained 7-methyl-1(3H)-isobenzofuranone was used for the following reaction without further purification. NMR spectrum (400 MHz, CDCl3) delta ppm: 2.71 (3H, s), 5.23 (2H, s), 7.25-7.30 (2H, m), 7.56 (1H, t, J=8 Hz). A solution of the 7-methyl-1(3H)-isobenzofuranone obtained above in tetrahydrofuran (80 ml) was cooled to 0C, and lithium borohydride (1.90 g, 87.2 mmol) was added thereto. The mixture was stirred at 60C for 2 hours, then cooled to 0C, and a 2N aqueous solution of hydrochloric acid (50 ml) was added dropwise. The product was extracted with ethyl acetate, and the solvent was evaporated under reduced pressure to give an oily residue. The residue was subjected to chromatography on a silica gel (75 g) column (eluent; ethyl acetate : hexane = 2 : 1 ? 1 : 0) to afford the title compound (4.17 g, 19% total yield from methyl 2,6-dimethylbenzoate) as an oil. NMR spectrum (400 MHz, CDCl3) delta ppm: 2.45 (3H, s), 4.76 (2H, s), 4.79 (2H, s), 7.17-7.22 (3H, m) IR spectrum nu max CHCl3 cm-1: 3605, 1469, 1380, 1002 Mass spectrum m/z (EI): 152 (M+).

The synthetic route of Methyl 2,6-dimethylbenzoate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sankyo Company, Limited; EP1362856; (2003); A1;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics