Study on pyrolysis products characteristics of medical waste and fractional condensation of the pyrolysis oil was written by Fang, Shuqi;Jiang, Luyao;Li, Pan;Bai, Jing;Chang, Chun. And the article was included in Energy (Oxford, United Kingdom) in 2020.Recommanded Product: 2-Ethylhexyl benzoate The following contents are mentioned in the article:
The dried and pulverized medical solid waste was pyrolyzed at 500 °C, and the components and characteristics were analyzed after the solid, liquid and gas products were collected resp. Exptl. results showed that the combustible component in the obtained gas product accounted for 83.22% and the heat value was 10,995.02kcal/Nm3. The liquid product obtained was black viscous tar with a heat value of 8972.82 kcal/kg, GC/MS anal. indicated that hydrocarbons and lipids accounted for about 60% of liquid product, and the carbon chain length of the products is C6-C28. The carbon content of solid product after purification was up to 63.13%, and the heat value was 5454.54 kcal/kg. Furthermore, in order to make the most of the pyrolysis oil, the liquid product was separated and purified by fractional condensation under the condition of decompression. The effect of process parameters such as vacuum degree and condensing temperature was emphasized, and the optimum technol. condition was obtained as follows: vacuum degree 0.04 MPa, heating temperature 140 °C and the first stage condensing temperature was 70 °C. Finally, the viscosity measurement of the residual high-viscosity components was intended to provide data support for the solution of tar plugging equipment and piping problems in practical applications. This study involved multiple reactions and reactants, such as 2-Ethylhexyl benzoate (cas: 5444-75-7Recommanded Product: 2-Ethylhexyl benzoate).
2-Ethylhexyl benzoate (cas: 5444-75-7) belongs to esters. Esters typically have a pleasant smell; those of low molecular weight are commonly used as fragrances and are found in essential oils and pheromones. Liquid esters of low volatility serve as softening agents for resins and plastics. Esters also include many industrially important polymers. Polymethyl methacrylate is a glass substitute sold under the names Lucite and Plexiglas; polyethylene terephthalate is used as a film (Mylar) and as textile fibres sold as Terylene, Fortrel, and Dacron.Recommanded Product: 2-Ethylhexyl benzoate
Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics