Bourdeaux, Daniel et al. published their research in Journal of Pharmaceutical and Biomedical Analysis in 2016 |CAS: 3319-31-1

The Article related to polyvinyl chloride plasticizer medical device migration, dehp alternatives, gc–ms, medical devices, migration tests, plasticizers, polyvinyl chloride, Pharmaceutical Analysis: Synthetic Organic Compounds and other aspects.Safety of Tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate

On January 25, 2016, Bourdeaux, Daniel; Yessaad, Mouloud; Chennell, Philip; Larbre, Virginie; Eljezi, Teuta; Bernard, Lise; Sautou, Valerie published an article.Safety of Tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate The title of the article was Analysis of PVC plasticizers in medical devices and infused solutions by GC-MS. And the article contained the following:

In 2008, di-(2-ethylhexyl) phthalate (DEHP), was categorized as CMR 1B under the CLP regulations and its use in PVC medical devices (MD) was called into question by the European authorities. This resulted in the commercialization of PVC MDs plasticized with the DEHP alternative plasticizers tri-octyl trimellitate (TOTM), di-(2-ethylhexyl) terephthalate (DEHT), di-isononyl cyclohexane-1,2-dicarboxylate (DINCH), di-isononyl phthalate (DINP), di-(2-ethylhexy) adipate (DEHA), and Acetyl tri-Bu citrate (ATBC). The data available on the migration of these plasticizers from the MDs are too limited to ensure their safe use. We therefore developed a versatile GC-MS method to identify and quantify both these newly used plasticizers and DEHP in MDs and to assess their migration abilities in simulant solution The use of cubic calibration curves and the optimization of the anal. method by an exptl. plan allowed us to lower the limit of plasticizer quantification. It also allowed wide calibration curves to be established that were adapted to this quantification in MDs during migration tests, irresp. of the amount present, and while maintaining good precision and accuracy. We then tested the developed method on 32 PVC MDs used in our hospital and evaluated the plasticizer release from a PVC MD into a simulant solution during a 24 h migration test. The results showed a predominance of TOTM in PVC MDs accompanied by DEHP (<0.1% weight/weight), DEHT, and sometimes DEHA. The migration tests showed a difference in the migration ability between the plasticizers and a non-linear kinetic release. The experimental process involved the reaction of Tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate(cas: 3319-31-1).Safety of Tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate

The Article related to polyvinyl chloride plasticizer medical device migration, dehp alternatives, gc–ms, medical devices, migration tests, plasticizers, polyvinyl chloride, Pharmaceutical Analysis: Synthetic Organic Compounds and other aspects.Safety of Tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate

Referemce:
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics