Related Products of 2318-25-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 2318-25-4 name is Ethyl 3-ethoxy-3-iminopropionate hydrochloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.
After all the 5- (4-methyl-piperazin-1-yl)-2-nitroaniline had disappeared from the reaction, the solution was purged with N2 for 15 minutes. Next, 440.0 g (2.25 mol) of ethyl 3-ethoxy-3-iminopropanoate hydrochloride was added as a solid. The reaction was stirred at 40-50°C (internal temperature) until the reaction was complete. The reaction was monitored by following the disappearance of the diamino compound by HPLC. The typical reaction time was 1-2 hours. After the reaction was complete, it was cooled to room temperature and filtered through a pad of Celite filtering material. The Celite filtering material was washed with absolute EtOH (2 x 250 mL), and the filtrate was concentrated under reduced pressure providing a thick brown/orange oil. The resulting oil was taken up in 850 mL of a 0.37percent HC1 solution. Solid NaOH (25 g) was then added in one portion, and a precipitate formed. The resulting mixture was stirred for 1 hour and then filtered. The solid was washed with H20 (2 x 400 mL) and dried at 50°C in a vacuum oven providing 251.7 g (74.1percent) of [6- (4-methyl-piperazin-1-yl)-lH-benzoimidazol-2-yl]- acetic acid ethyl ester as a pale yellow powder.After all the 5- (4-methyl-piperazin-1-yl)-2-nitroaniline had disappeared from the reaction, the solution was purged with N2 for 15 minutes. The diamine intermediate is air sensitive so care was taken to avoid exposure to air. 500 g (2.56 mol) of ethyl 3-ethoxy-3-iminopropanoate hydrochloride was added to the reaction mixture over a period of about 30 minutes. The reaction was stirred at 45- 55°C (internal temperature) under N2 until the diamine was completely consumed as determined by HPLC. The typical reaction time was about 2 hours. After the reaction was complete, the reaction was filtered while warm through a pad of Celite. The reaction flask and Celite were then washed with 200 proof EtOH (3 x 285 mL). The filtrates were combined in a 5000 mL flask, and about 3300 mL of ethanol was removed under vacuum producing an orange oil. Water (530 mL) and then 1M HCL (350 mL) were added to the resulting oil, and the resulting mixture was stirred. The resulting solution was vigorously stirred while 30percent NaOH (200 mL) was added over a period of about 20 minutes maintaining the internal temperature at about 25-30°C while the pH was brought to between 9 and 10. The resulting suspension was stirred for about 4 hours while maintaining the internal temperature at about 20-25°C. The resulting mixture was filtered, and the filter cake was washed with H20 (3 x 300 mL). The collected solid was dried to a constant weight at 50°C under vacuum in a vacuum oven providing 345.9 g (90. 1percent) of [6- (4-methyl-piperazin-1-yl)-lH-benzoimidazol-2- yl] -acetic acid ethyl ester as a pale yellow powder. In an alternative work up procedure, the filtrates were combined and the ethanol was removed under vacuum until at least about 90percent had been removed. Water at a neutral pH was then added to the resulting oil, and the solution was cooled to about 0°C. An aqueous 20percent NaOH solution was then added slowly with rapid stirring to bring the pH up to 9.2 (read with pH meter). The resulting mixture was then filtered and dried as described above. The alternative work up procedure provided the light tan to light yellow product in yields as high as 97percent.
At the same time, in my other blogs, there are other synthetic methods of this type of compound, Ethyl 3-ethoxy-3-iminopropionate hydrochloride, and friends who are interested can also refer to it.
Reference:
Patent; CHIRON CORPORATION; WO2005/82340; (2005); A2;,
Ester – Wikipedia,
Ester – an overview | ScienceDirect Topics